IP router - KNX Ethernet Interface for home automation IPR/S 3.1.1

IPR/S 3.1.1 2CDG110175R0011 4016779906487 EAN/GTIN DE 91945327 WEEE

Our best price
22,246.84₹ excl. VAT
45,652.33₹ (-51.27% RRP***)

5-6 days* (IND)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
IP router REG IPR/S 3.1.1 bus system KNX, other bus systems without, Ethernet version, type of... more
IP router - KNX Ethernet Interface for home automation IPR/S 3.1.1 – ABB – 2CDG110175R0011 – 4016779906487: IP router REG IPR/S 3.1.1 bus system KNX, other bus systems without, Ethernet version, type of installation REG, width in modular units 2, material plastic, material quality thermoplastic, surface untreated, surface design matt, color grey, RAL number (similar ) 7035, max. transmission rate 1000000Bd, with bus coupling, with labeling field, with LED display, degree of protection (IP) IP20, min. depth of the device box 63.5mm, the router forms the interface between KNX installations and IP networks and works according to the KNXnet /IP Specification (Tunneling and Routing). The IPR/S can be used as a fast line or area coupler (routing). The complete filter table for all main groups (0-31) can be loaded. With the ETS, KNX devices can be programmed via LAN. 5 tunneling servers are available for this and other clients. The IP address of the IPR/S can be set permanently or received from a DHCP server. Power is supplied via 12..30 V DC or alternatively via Power-over-Ethernet (PoE) according to IEEE 802.3af Class 1. As an alternative to the KNX standard communication (multicast), up to 10 IPR/S 3.1.1 can communicate via unicast.
... more
Bus system KNX yes
Bus system KNX radio no
Bus system radio bus no
Bus system LON no
Bus system Powernet no
Other bus systems without
Radio bidirectional no
Execution Ethernet
Mounting REG
Width in division units 2
Material Plastic
Material quality Thermoplastic
Surface protection untreated
Execution of the surface frosted
Colour other
RAL number (similar) 7035
Transparent no
Max. Transmission rate 700..2500 1/min
With bus coupling no
With labeling field yes
With LED display yes
IP protection) IP20
Min. depth of the device socket 63.5 mm

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "IP router - KNX Ethernet Interface for home automation IPR/S 3.1.1"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.