Switch/dimming actuator 2-fold, 16A - KNX light control unit SD/S2.16.1

SD/S2.16.1 2CDG110079R0011 4016779659963 EAN/GTIN DE 91945327 WEEE

Our best price
12,700.16₹ excl. VAT
26,060.26₹ (-51.27% RRP***)

5-6 days* (IND)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Switch/dimming actuator 2-fold, 16A, REG SD/S2.16.1 bus system KNX, width in modular units 4,... more
Switch/dimming actuator 2-fold, 16A - KNX light control unit SD/S2.16.1 – ABB – 2CDG110079R0011 – 4016779659963: Switch/dimming actuator 2-fold, 16A, REG SD/S2.16.1 bus system KNX, width in modular units 4, with bus coupling, interface 1-10 V, number of inputs for light sensors 0, max. switching current (resistive load) 16A, number of Outputs 2, REG devices for switching and dimming via ABB i-bus® of 2, 4 or 8 independent lighting groups from electr. Ballasts with 1-10V control interface. With potential-free load relays (16A-AC1), the supply voltage of the ballasts can be switched on and off via ABB i-bus® or manually for each channel. Switching status display available. No power supply required.
... more
Bus system KNX yes
Bus system KNX radio no
Bus system radio bus no
Bus system LON no
Bus system Powernet no
Other bus systems without
Radio bidirectional no
Execution Dimming actuator
Mounting REG
Width in division units 4
With bus coupling no
Bus module removable no
Extension input no
On-site / manual operation yes
With LED display no
Number of exits 2
Output 2300 W
Power supplement usable no
Load type universal
Max. Control current 100mA
Max. switching capacity LED 400W
Tension 110..230 V
Parallel operation possible no
Frequency 50..60 Hz
IP protection) IP20
Min. depth of the device socket 64.5 mm

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Switch/dimming actuator 2-fold, 16A - KNX light control unit SD/S2.16.1"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.