KNX bus coupler 75040001

KNX bus coupler 75040001 – Berker – 4011334161844: Flush-mounted bus coupler, instabus KNX/EIB 75040001 KNX bus system, other bus systems without, flush-mounting type of installation, width in modular units 0, number of sensor/actuator connections 2, screw fastening type, min. depth of device box 25mm, flush-mounted bus coupler KNX. Bus coupler flush, interface between user module and bus line. For installation in standard 58 mm switch boxes. Installation without claws, via support ring using device screws. The flush-mounted bus coupler is a KNX component in a flush-mounted housing with support ring. It represents the mechanical, electrical and data-technical interface between the user modules and the bus line. By programming with an application (software), telegrams can be generated and sent or received and evaluated. The bus coupler is dimensioned for installation in standard 58 mm flush-mounted switch boxes. It is installed using a support ring using the device screws of the switch box. A connection terminal is required to connect the bus line. The flush-mounted bus coupler is suitable for connecting user modules of all available Berker designs. User module and bus coupler must be of the same make.