Dimmer insert - Dimmer flush mounted 2...250VA 6523 U-102

Dimmer insert - Dimmer flush mounted 2...250VA 6523 U-102 – Busch Jaeger – 2CKA006512A0334 – 4011395212677: Dimmer insert 6523 U-102 Composition of the basic element, rotary/push button operation, phase control dimming, trailing edge phase cut dimming, load type universal and LED retrofit, extension input, light value memory, flush-mounted type of installation, type of attachment claw/screw attachment, material plastic, material quality thermoplastic, halogen-free, surface untreated, finish of the surface matt, color black, suitable for degree of protection (IP) IP20, impact resistance IK00, rated voltage 207 ... 253V, frequency 50 ... 60Hz, control voltage 230 ... 230V, rated power 2 ... 250VA, connection type Screw terminal, core cross-section 0.8 ... 4mm², device width 71mm, device height 71mm, device depth 32mm, min. depth of the device box 40mm, with rotary actuation, push sequence toggle switch and soft latching. 2-wire connection technology (neutral wire not required). Optimized for dimming retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi) on conventional or electronic transformers For incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers and dimmable halogen energy-saving lamps. Mixed load operation LEDi and conventional lamps possible. Can be switched between leading edge and trailing edge using a selector switch. Low-noise through the use of MOSFET transistors. Short-circuit-proof and overload-proof (electronic fuse). With adjustable minimum brightness. Without central disc. Rated voltage: 230 V~, + 10% / - 10% Rated frequency: 50 Hz/60 Hz Rated power: 2 - 100 W/VA (retrofit LED loads). Rated power: 10 - 250 W/VA (non-LED loads).