Ratchet ring wrench. black=8mm - Combination spanner 8mm 11 2508

Cimco - 11 2508 - Ratchet ring wrench. black=8mm - Combination spanner 8mm 11 2508
Photo source: fig. possibly similar
Photo source: fig. possibly similar
11 2508 4021103125083 EAN/GTIN DE 83638330 WEEE

Our best price
1,233.61₹ excl. VAT
1,535.45₹ (-19.66% RRP***)

16-17 days* (IND)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Ratchet ring wrench. SW=8mm 11 2508 Wrench size jaw side 8mm, wrench size ring side 8mm, head... more
Ratchet ring wrench. black=8mm - Combination spanner 8mm 11 2508 – Cimco – 4021103125083: Ratchet ring wrench. SW=8mm 11 2508 Wrench size jaw side 8mm, wrench size ring side 8mm, head width jaw side 15.8mm, head width ring side 18.3mm, head height jaw side 5mm, head height ring side 7.7mm, length 135mm, cranked, ratchet design, number of corners 12, ratchet ring and Open-end wrench for ratcheting loosening or quick tightening of screws and nuts in one go without using the ring ratchet. On one side open-end wrench with 15 degree offset, on the other side a ring spanner of the same size with built-in ratchet mechanism with special advantages: ratchet with fine teeth: 72 teeth = only 5 degrees minimum swivel angle. Left and right rotation is achieved by simply turning the key and not by means of an annoying switch lever, which often shifts unintentionally. The keys build very narrow despite the ratchet. This means that the tools can be used particularly well in confined spaces. 12-point ring with flank drive, i.e. the drive no longer takes place via the corners of the screw head but on the flanks, which means that a significantly higher power transmission is achieved and the edges of screw heads and nuts are protected Drop-forged chrome-vanadium steel, specially hardened, highly polished, nickel-plated and hard-chromed. Very high torque transmission, the DIN requirements are exceeded. 8mm
... more
Width across the mouth 8 mm
Key width ring side 8 mm
Head width open side 15.8 mm
Head width ring side 18.3 mm
Head height of the side of the mouth 5 mm
Head height ring side 7.7 mm
Length 135 mm
Low-sparking design no
Cranked yes
Suitable for rotary pin no
With pivot pin no
Protective insulation 1000 V no
Ratchet type yes
Number of corners 12
Surface protection chromed
Mass 280 g
VDE tested no

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Ratchet ring wrench. black=8mm - Combination spanner 8mm 11 2508"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.