Combination arrester 1 DEHNvenCI - Combined arrester for power systems DVCI 1 255

DVCI 1 255 961200 4013364145108 EAN/GTIN DE 11890845 WEEE

Our best price
21,604.71₹ excl. VAT
40,918.37₹ (-47.2% RRP***)

16-17 days* (IND)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Combined arrester 1 DEHNvenCI DVCI 1 255 TN system type, TN-C system type, TN-CS system type,... more
Combination arrester 1 DEHNvenCI - Combined arrester for power systems DVCI 1 255 – Dehn – 961200 – 4013364145108: Combined arrester 1 DEHNvenCI DVCI 1 255 TN system type, TN-C system type, TN-CS system type, TN-S system type, TT system type, number of poles 1, lightning impulse current (10/350 µs) 25kA, maximum continuous voltage AC 255V, nominal voltage AC 230V, Protection level 1.5kV, follow current extinguishing capability 50kA, specific energy (W/R) 156.25kJ/Ohm, max. conductor cross-section rigid (solid/stranded) 50mm², max. Optical signaling on the device, test class type 1, integrated back-up fuse, energy-coordinated protective effect to the end device, degree of protection (IP) IP20, single-pole combined arrester DEHNvenCI, type 1 according to EN 61643-11 based on spark gaps with integrated arrester back-up fuse. Maximum system availability thanks to RADAX Flow follow current limitation. Enables endpoint protection. To protect low-voltage consumer systems against overvoltages, even in the case of direct lightning strikes. Can be used according to the lightning protection zone concept at the interfaces 0A - 2.
... more
Network form DC no
Network form IT no
Network shape TN yes
Mains form TN-C yes
Mains form TN-CS yes
Mains form TN-S yes
Network shape TT yes
Network form other no
Number of poles 1
Lightning impulse current (10/350 µs) 25 kA
Highest continuous voltage AC 255V
Rated voltage AC 230V
Protection level 1.5 kV
Follow current extinguishing capability 50 kA
Specific energy (W / R) 156.25 kJ/ohms
Mounting DIN rail TH35
Size 2 TE
Remote signaling no
Signaling on the device optical
Test class Type 1 and 2
Integrated backup fuse yes
Voltage switching spark gap technology yes
Overcurrent-protected voltage tap-off no
IP protection) IP20

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Combination arrester 1 DEHNvenCI - Combined arrester for power systems DVCI 1 255"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.