Blitzductor XT combi arrester module - Combined arrester for signal systems BXT ML2 BD 180

BXT ML2 BD 180 920247 4013364116078 EAN/GTIN DE 11890845 WEEE

Our best price
7,632.47₹ excl. VAT
14,455.01₹ (-47.2% RRP***)

5-6 days* (IND)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Combination arrester module Blitzductor XT BXT ML2 BD 180 Rated voltage DC 180 ... 180V, maximum... more
Blitzductor XT combi arrester module - Combined arrester for signal systems BXT ML2 BD 180 – Dehn – 920247 – 4013364116078: Combination arrester module Blitzductor XT BXT ML2 BD 180 Rated voltage DC 180 ... 180V, maximum continuous voltage AC 127V, maximum continuous voltage DC 180V, lightning impulse current (10/350 µs) 5kA, nominal discharge current (8/20) 20kA, nominal load current 0.75A , protection level wire/wire 250V, protection level wire/earth 550V, cut-off frequency 25MHz, type of mounting on base element, connection 1 other, arrester monitoring, explosion-tested design, space-saving combined arrester module with LifeCheck to protect 1 pair of unearthed symmetrical interfaces, optionally direct or indirect shield earthing. LifeCheck detects thermal or electrical overload conditions after which the arrester must be replaced. The display is contactless using DEHNrecord LC / SCM / MCM.
... more
Rated voltage DC 180V
Highest continuous voltage AC 127 V
Highest continuous voltage DC 180V
Lightning impulse current (10/350 µs) 5 kA
Nominal discharge current (8/20) 20 kA
Nominal load current 0.75 A
Protection level wire / core 250V
Protection level core / earth 550V
Cut-off frequency 25 MHz
Mounting on base element
Connection 1 Screw terminal
SPD yes
With telecommunication contact no
Explosion-tested version yes
Separation option for signal circuit no
Number of conductors (without earth) 2
Earthing via DIN rail
Overall width 12 mm
IP protection) IP20

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Blitzductor XT combi arrester module - Combined arrester for signal systems BXT ML2 BD 180"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.