Surge arrester Blitzductor VT - Surge protection for signal systems BVT RS485 5

BVT RS485 5 918401 4013364074224 EAN/GTIN DE 11890845 WEEE

Our best price
10,976.42₹ excl. VAT
20,789.44₹ (-47.2% RRP***)

16-17 days* (IND)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
ÜS arrester Blitzductor VT BVT RS485 5 Rated voltage DC 5 ... 5V, maximum continuous voltage AC... more
Surge arrester Blitzductor VT - Surge protection for signal systems BVT RS485 5 – Dehn – 918401 – 4013364074224: ÜS arrester Blitzductor VT BVT RS485 5 Rated voltage DC 5 ... 5V, maximum continuous voltage AC 4.2V, maximum continuous voltage DC 6V, rated discharge current (8/20) 10kA, lightning current (10/350 µs) 0.8kA, rated load current 0, 5A, protection level wire/wire 8.5V, protection level wire/earth 600V, cut-off frequency 1.7MHz, mounting type DIN rail TH35, connection 1 terminal, signaling on the device without arrester for many applications, e.g. B. for four-wire symmetrical interfaces RS485/422 or temperature sensors. Choice of direct or indirect shield grounding and connection of a signal ground (SG).
... more
Rated voltage DC 5 V
Highest continuous voltage AC 4.2V
Highest continuous voltage DC 6V
Nominal discharge current (8/20) 10 kA
Lightning impulse current (10/350 µs) 0.8 kA
Nominal load current 0.5 A
Protection level wire / core 8.5V
Protection level core / earth 600V
Cut-off frequency 1.7 MHz
Mounting DIN rail TH35
Connection 1 Screw terminal
SPD no
With telecommunication contact no
Signaling on the device without
Explosion-tested version no
Separation option for signal circuit no
Number of conductors (without earth) 4
Earthing via separate head
Overall width 54 mm
IP protection) IP20

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Surge arrester Blitzductor VT - Surge protection for signal systems BVT RS485 5"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.