End piece - device install. duct

You are probably familiar with device installation ducts, also known as sill ducts, from authorities and other office buildings, where such plastic ducts for laying power and data cables have been attached to the wall or floor within the respective rooms. Devices such as sockets, light switches and data transmission interfaces are also housed in these channels. These device installation ducts are very flexible and can be individually and almost endlessly combined with one another. But at some point the required cable and line supply will come to an end. It is then necessary for the ducts to be properly terminated in order to protect the electrical and electronic components inside from external influences such as dust, dirt and moisture. For the various device installation trunking available on the market from different manufacturers, you can also get the right end pieces here in the eibabo online shop.

Catalogue content:


In this eibabo® catalogue Installation ducts for wall and ceiling > End piece for wall duct you will find items from the following product groups:

Item overview:

  • Channel termination
  • End cap
  • End piece
  • End piece for device installation trunking
  • End piece for parapet duct
  • End piece for wall duct
  • End plate
  • End terminal
  • Endplate
  • Final closure
  • Graduation cap
  • Parapet channel
  • Plastic
  • Sheet steel
  • Terminal panel


from the following manufacturers:

Manufacturer overview catalogue End piece - device install. duct:

  • Kleinhuis
  • Niedax
  • Niedergesäß
  • OBO
  • Rehau
  • Tehalit


 
You are probably familiar with device installation ducts, also known as sill ducts, from authorities and other office buildings, where such plastic ducts for laying power and data cables have been... read more »
Close window
End piece - device install. duct
You are probably familiar with device installation ducts, also known as sill ducts, from authorities and other office buildings, where such plastic ducts for laying power and data cables have been attached to the wall or floor within the respective rooms. Devices such as sockets, light switches and data transmission interfaces are also housed in these channels. These device installation ducts are very flexible and can be individually and almost endlessly combined with one another. But at some point the required cable and line supply will come to an end. It is then necessary for the ducts to be properly terminated in order to protect the electrical and electronic components inside from external influences such as dust, dirt and moisture. For the various device installation trunking available on the market from different manufacturers, you can also get the right end pieces here in the eibabo online shop.

Catalogue content:


In this eibabo® catalogue Installation ducts for wall and ceiling > End piece for wall duct you will find items from the following product groups:

Item overview:

  • Channel termination
  • End cap
  • End piece
  • End piece for device installation trunking
  • End piece for parapet duct
  • End piece for wall duct
  • End plate
  • End terminal
  • Endplate
  • Final closure
  • Graduation cap
  • Parapet channel
  • Plastic
  • Sheet steel
  • Terminal panel


from the following manufacturers:

Manufacturer overview catalogue End piece - device install. duct:

  • Kleinhuis
  • Niedax
  • Niedergesäß
  • OBO
  • Rehau
  • Tehalit
Close filters
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
from to

8 From 21
No results were found for the filter!
Niedax - GADU 133T90 VW - GK end cap encompassing 135x90mm - End piece for wall duct 135x90mm GADU 133T90 VW
1,601.07₹ excl. VAT

*

plus shipping
(2,924.67₹ RRP***)
GK end cap encompassing 135x90mm - End piece for wall duct 135x90mm
Niedax
| GADU 133T90 VW
Niedax - GADU 170T90 VW - GK end cap encompassing 172x90mm - End piece for wall duct 172x90mm GADU 170T90 VW
1,923.53₹ excl. VAT

*

plus shipping
(3,515.23₹ RRP***)
GK end cap encompassing 172x90mm - End piece for wall duct 172x90mm
Niedax
| GADU 170T90 VW
Niedax - GADU 110T90 VW - GK end cap 112x90mm - End piece for wall duct 112x90mm GADU 110T90 VW
1,554.20₹ excl. VAT

*

plus shipping
(2,840.30₹ RRP***)
GK end cap 112x90mm - End piece for wall duct 112x90mm
Niedax
| GADU 110T90 VW
RECOMMENDED
PROTEC.class - 05101313 - BR end piece PBRES 105 105mm cream white 05101313
471.51₹ excl. VAT

*

BR end piece PBRES 105 105mm cream white
PROTEC.class
| 05101313
RECOMMENDED
PROTEC.class - 05101314 - BR end piece PBRES 105 105mm light gray 05101314
471.51₹ excl. VAT

*

BR end piece PBRES 105 105mm light gray
PROTEC.class
| 05101314
RECOMMENDED
PROTEC.class - 05101317 - BR end piece PBRES 130 130mm light gray 05101317
515.57₹ excl. VAT

*

BR end piece PBRES 130 130mm light gray
PROTEC.class
| 05101317
PROTEC.class - 05101319 - BR end piece PBRES 170 170mm cream white 05101319
927.08₹ excl. VAT

*

BR end piece PBRES 170 170mm cream white
PROTEC.class
| 05101319
RECOMMENDED
OBO - GA-E70130EL - End piece 70x130mm - End piece for device mount wireway GA-E70130EL
3,830.19₹ excl. VAT

*

plus shipping
(5,502.50₹ RRP***)
End piece 70x130mm - End piece for device mount wireway
OBO
| GA-E70130EL
RECOMMENDED
Niedax - GADU 220T60 R - GK end cap encompassing 222x61mm - End piece for device mount wireway GADU 220T60 R
1,957.28₹ excl. VAT

*

plus shipping bulky item
(3,327.75₹ RRP***)
GK end cap encompassing 222x61mm - End piece for device mount wireway
Niedax
| GADU 220T60 R
RECOMMENDED
OBO - GK-E70130WA - End piece 70x130mm, PC/ABS - End piece for device mount wireway GK-E70130WA
1,019.88₹ excl. VAT

*

plus shipping
(1,734.18₹ RRP***)
End piece 70x130mm, PC/ABS - End piece for device mount wireway
OBO
| GK-E70130WA
RECOMMENDED
Tehalit - L 2363 rws - End plate for BR85170 - End piece for device mount wireway L 2363 rws
1,101.44₹ excl. VAT

*

plus shipping
(1,668.56₹ RRP***)
End plate for BR85170 - End piece for device mount wireway
Tehalit
| L 2363 rws
RECOMMENDED
Tehalit - BRS1001306 vws - End piece laminated. 100x130mm sheet steel - End piece for device mount wireway BRS1001306 vws
4,021.42₹ excl. VAT

*

plus shipping
(6,093.06₹ RRP***)
End piece laminated. 100x130mm sheet steel - End piece for device mount wireway
Tehalit
| BRS1001306 vws
8 From 21
Viewed from you