Power booster for Univ dimmer switch - Power boost DRA (DIN-rail adapter) FLUD14

Eltako - FLUD14 - Power booster for Univ dimmer switch - Power boost DRA (DIN-rail adapter) FLUD14
Photo source: fig. possibly similar
Photo source: fig. possibly similar
FLUD14 30014007 4010312313763 EAN/GTIN DE 30298319 WEEE

Our best price
4,695.53₹ excl. VAT
6,374.45₹ (-26.34% RRP***)

16-17 days* (IND)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Power booster for Univ dimmer switch FLUD14 Mounting type REG, material plastic, material quality... more
Power booster for Univ dimmer switch - Power boost DRA (DIN-rail adapter) FLUD14 – Eltako – 30014007 – 4010312313763: Power booster for Univ dimmer switch FLUD14 Mounting type REG, material plastic, material quality thermoplastic, halogen-free, surface other, surface design not applicable, color blue, load type universal, connected load 300 ... 400W, nominal voltage 230V, power booster for dimmer switch FUD14/800W, Power MOSFET up to 400W. Standby loss only 0.1 watts. Modular installation device for mounting on DIN rail. FLUD14 power boosters can be connected to the FUD14/800W universal dimmer switch, which increases the switching capacity for one light by up to 200W, depending on the ventilation conditions, and by up to 400W for additional lights, per power booster. The two circuits for increasing the power can be executed simultaneously with several FLUD14. Supply voltage 230V. No minimum load required. Automatic electronic overload protection and over-temperature shutdown. The lamp type of a FLUD14 power booster can deviate from the lamp type of the universal dimmer switch FUD14/800W in the power increase circuit with additional lights. This makes it possible to mix capacitive loads and inductive loads. A ventilation distance of 1/2 module to the devices installed next to it must be observed.
... more
Mounting REG
Material Plastic
Material quality Thermoplastic
Halogen free yes
Surface protection other
Execution of the surface frosted
Colour blue
Transparent no
Load type universal
Power consumption 300..400 W
Nominal voltage 230V

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Power booster for Univ dimmer switch - Power boost DRA (DIN-rail adapter) FLUD14"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.