Bus telegram duplicator RS485 - Basic module for home automation FTD14

FTD14 30014057 4010312315705 EAN/GTIN DE 30298319 WEEE

Our best price
6,391.15₹ excl. VAT
8,680.26₹ (-26.37% RRP***)

5-6 days* (IND)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Bus telegram duplicator RS485 FTD14 bus system radio bus, other bus systems other, mounting type... more
Bus telegram duplicator RS485 - Basic module for home automation FTD14 – Eltako – 30014057 – 4010312315705: Bus telegram duplicator RS485 FTD14 bus system radio bus, other bus systems other, mounting type REG, width in modular units 1, number of inputs 60, number of outputs 60, protection class (IP) IP20, with bus coupling, telegram duplicator for the Eltako RS485 Bus with interchangeable antenna. Standby loss only 0.5 watts. Connection to the Eltako RS485 bus. Bus cross-wiring and power supply with jumper. Operation in connection with FAM14 or FTS14KS. The telegrams of learned IDs are duplicated and sent directly to the Eltako wireless network with a new output ID. These radio telegrams can be specifically taught into decentralized actuators. A total of 120 memory locations are available. The upper rotary switch is used to send a radio telegram in accordance with the operating instructions. In normal operation it is set to RUN. The lower rotary switch is used to learn and delete IDs according to the operating instructions. In normal operation it is set to RUN. The red LED under the upper rotary switch accompanies the learning process. The green LED under the lower rotary switch lights up briefly when a radio telegram is sent.
... more
Bus system KNX no
Bus system KNX radio no
Bus system radio bus yes
Bus system LON no
Bus system Powernet no
Other bus systems other
Mounting REG
Width in division units 1
On-site / manual operation no
Number of inputs 60
Number of exits 60
IP protection) IP20
With bus coupling yes

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Bus telegram duplicator RS485 - Basic module for home automation FTD14"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.