KNX room control unit G1, glass/white 206912

206912 4010337014300 EAN/GTIN DE 59229780 WEEE

Our best price
88,442.15₹ excl. VAT
111,811.37₹ (-20.9% RRP***)

5-6 days* (IND)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Room control unit G1 UP PoE glass/white 206912 bus system KNX, other bus systems eNet, mounting... more
KNX room control unit G1, glass/white 206912 – Gira – 4010337014300: Room control unit G1 UP PoE glass/white 206912 bus system KNX, other bus systems eNet, mounting type flush-mounted, with display, status LED, temperature controller, with theft/dismantling protection, central functional unit for transmitters/actuators, material other, material quality other, surface other, version the surface does not apply, color white, protection class (IP) IP21, Gira G1 PoE glass white The Gira G1 is a multifunctional room control device for visualizing and operating a variety of building functions. For use in the KNX system and in the Gira door communication system or as a client. The respective range of functions depends on the firmware used. Please refer to the Gira online catalog and the technical device documentation for the exact range of functions. Features: Operation is via a gesture-capable multi-touch display. Connection and communication depends on the variant via LAN or WLAN. Integrated speaker. Integrated microphone with echo cancellation. Possible uses and combinations: The Gira G1 as a multifunctional room control device provides the following functions or combinations of functions: KNX room control device Home station Video client for the following systems Server - HomeServer - eNet - X1 security system Alarm Connect Integration of Internet services Properties as a KNX room control device: Intuitively operable and end-user customizable interface. Switching, buttons, dimming (relative and absolute), dimming (including dimming RGB, RGBW and tunable white) blind and roller shutter control, value transmitter, scene extension. Status display, date and time display, indoor and outdoor temperature display. Up to 150 functions (six function folders or rooms with up to 25 functions each). Up to 125 weekly timers with 10 switching times each. Room temperature controller in combination with the optionally available temperature sensor module or KNX devices for room temperature measurement, e.g. B. Button sensor 3 comfort. Operating modes: Comfort, standby, night and frost or heat protection, each with their own temperature setpoints (for heating and/or cooling). Operating modes can be individually adjusted. A heating timer as a weekly timer with 28 switching times. Room temperature controller extension for controlling air conditioning systems (fan coil) in conjunction with a KNX gateway for air conditioning systems. Features as a video home station: Camera switching: targeted selection of the connected color cameras. Control of the door opener. Turn ringtone on and off. Ringtone selectable from 10 melodies. Properties as a home station with SIP client: Client function for SIP third-party systems from e.g. B. Comelit, TCS, SCHÜCO SIP Direct calls or possible via registrar 64 internal calls possible e.g. B. to the Concierge Early Media Support for video images Integration of Internet services: Gira Weather Portal: Display of the weather forecast for up to five locations (Internet connection required). The Gira G1 can also be used as a client for the following server systems: HomeServer Client eNet Client X1 Client Security system Alarm Connect When functioning as a client, the functions of the KNX room control unit are not available. Please refer to the Gira online catalog and the technical device documentation for the exact range of functions. Gira G1 with flush-mounted PoE LAN connection module. The power is supplied via the network cable (Power over Ethernet). Data communication via LAN. Notes: For indoor use only. Recommended mounting height: 150 cm from the floor. Installation is carried out on a deep device box (recommendation is an electronics box for a LAN connection). Communication with the KNX installation takes place exclusively via the KNXnet IP standard. A KNX IP router must be used to connect the Gira G1 PoE to the KNX installation. Several Gira G1 can be operated on one KNX IP router. To connect the Gira G1 230 V or G1 24 V to the KNX installation, a Gira KNX IP router (from firmware version 3) is required to ensure reliable communication in the WLAN. For this purpose, the Gira KNX IP router (from firmware version 3) is specially equipped with the additional function reliable data communication. Several Gira G1 can be operated on one Gira KNX IP router (from firmware version 3). Hardware prepared for KNX Secure from index level I08 (additional firmware update required). Commissioning in the KNX system from ETS 5.5 or higher. Can be used as a home station in conjunction with a TKS-IP gateway. When planning the system, please note the technical information on network planning in the device documentation. The Gira Project Assistant (GPA) is required for firmware updates. The GPA is available free of charge in the Gira download area. To use the timers, either an internet connection to an NTP time server or a corresponding KNX timer (e.g. Gira Weather Station Plus 2074 00) is required. The use of an electronics box is recommended for installing the PoE flush-mounted connection module. A commercially available PoE-capable switch or router or a PoE injector is required. We recommend using an electronics box to install the PoE flush-mounted connection module. A commercially available PoE-capable switch or router or a PoE injector is required.
... more
Bus system KNX yes
Bus system KNX radio no
Bus system radio bus no
Bus system LON no
Bus system Powernet no
Other bus systems eNet
Mounting Flush
With display yes
Status LED yes
IR sensor no
Presence button no
With temperature controller yes
With integrated DCF77 receiver no
With timer no
With theft / disassembly protection yes
Central functional unit for transmitters / actuators yes
Material other
Material quality other
Surface protection other
Colour white
Transparent no
IP protection) IP21
With bus coupling no
Min. depth of the device socket 32 mm

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "KNX room control unit G1, glass/white 206912"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.