KNX area coupler, line coupler TYF130

TYF130 3250617577359 EAN/GTIN DE 23692311 WEEE

Our best price
24,918.47₹ excl. VAT
45,941.66₹ (-45.76% RRP***)

16-17 days* (IND)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
KNX line/area coupling TYF130 bus system KNX, other bus systems without, mounting type REG, width... more
KNX area coupler, line coupler TYF130 – Hager – 3250617577359: KNX line/area coupling TYF130 bus system KNX, other bus systems without, mounting type REG, width in modular units 2, line/area coupler, KNX. For connecting two KNX bus lines, whereby the signal transmission is galvanically isolated. The line and area coupler can be configured in connection with the ETS4 with the group addresses 0 to 31 and a data flow filter that acts as a signal amplifier for comprehensive bus telegrams can also be configured. If the maximum line load is exceeded, an additional line coupler including power supply must be used.
... more
Bus system KNX yes
Bus system KNX radio no
Bus system radio bus no
Bus system LON no
Bus system Powernet no
Other bus systems without
Mounting REG
Width in division units 2

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "KNX area coupler, line coupler TYF130"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.