Wireless solar sensor - Brightness sensor for bus system FM FS 1 S

Wireless solar sensor - Brightness sensor for bus system FM FS 1 S – Jung – 4011377086722: Radio sun sensor Solar FM FS 1 S bus system radio bus, other bus systems eNet, radio bidirectional, surface-mounted mounting type, sensor design light sensor built-in, setting 4000 ... 80000lx, new system function: fully encrypted radio transmission (AES-CCM) from eNet server software version 2.0 Intended use Use Sensor for brightness-dependent control of eNet actuators Installation on window panes indoors Product features Triggers scenes when the set sun protection and twilight values are exceeded or fallen below Temperature-dependent sun protection possible Scene buttons for sun protection and twilight Brightness measurement via brightness sensor Sends brightness values to the eNet server when the brightness changes by more as 50% test operation for adjusting sun protection and temperature threshold Solar-powered device Integrated battery as energy storage Can be set with eNet server: Control locks Additional functions with eNet server: Fully encrypted radio transmission (AES-CCM) from eNet server software version 2.0 Update of the device software Read out error memory Sun protection The sun protection function enables the automatic closing of a blind in strong sunlight. If a set sun protection value is exceeded for more than 2 minutes, the sun sensor sends the “sun protection” scene and the blinds move to their previously saved sun protection position. If the brightness falls below the set sun protection value for more than 15 minutes, the blind moves up again. Temperature-dependent sun protection The temperature-dependent sun protection can be used especially in the colder seasons. The shading of the interior is only triggered when the set temperature value is exceeded in addition to the sun protection value. After the sun protection is triggered, the temperature evaluation is deactivated. Twilight When darkness falls, the twilight function enables blinds to be automatically lowered or lighting to be switched on. If the twilight value falls below the set value for more than 4 minutes, the “twilight” scene is called up. If the set twilight threshold is exceeded for approx. 15 minutes, the blind moves up again or the lighting switches off. In order to open the blind automatically even at dawn, the sun sensor must be positioned so that it is not shaded by the blind. Ambient temperature: -5 ... +45 °C Brightness setting: 4,000 ... 80,000 lx Twilight setting: 5 ... 250 lx Temperature setting: +15 ... +40 °C (and OFF) Dimensions (Ø x H): 75 x 27 mm Radio frequency: 868.0 ... 868.6 MHz Transmission power: max. 20 mW Transmission range in open field: typ. 100 m Receiver category: 2