Universal LED touch dimmer - Dimmer flush mounted 20...420VA 1711 DE

Universal LED touch dimmer - Dimmer flush mounted 20...420VA 1711 DE – Jung – 4011377166912: Universal LED touch dimmer 1711 DE Composition of basic element, push button operating mode, dimming leading edge, dimming trailing edge, load type universal, extension input, light value memory, can be used with button, can be used with motion detector, can be used with presence detector, can be used with time switch/timer, can be used with radio button, type of installation flush-mounted, Fastening type claw/screw fastening, material other, material quality other, halogen-free, rated voltage 230 ... 230V, frequency 50 ... 60Hz, rated power 20 ... 420VA, connection type screw terminal, core cross-section 0.5 ... 4mm², touch dimmer universal LED , insert, with extension input, rated voltage: AC 230 V ~, mains frequency: 50/60 Hz, standby power: approx. 0.25 W, power loss: approx. 4 W, device works according to the leading edge or trailing edge principle, device can be used without neutral conductor can be operated, automatic or manual setting of the dimming principle suitable for the load, LED display of the set operating mode, E switch on with lamp-friendly soft start, switch on with the last brightness setting or saved switch-on brightness, switch-on brightness can be saved permanently, minimum brightness can be saved permanently, electronic short-circuit protection with permanent switch-off after 7 seconds at the latest, electronic over-temperature protection, test mode for function testing, connected load at 25 °C: Incandescent lamps: 20 to 420 W, HV halogen lamps: 20 to 420 W, HV LED lamps dimmable: typically 3 to 100 W, compact fluorescent lamps dimmable: typically 3 to 100 W, electronic transformers: 20 to 420 W, electronic transformers with LV LEDs 20 to 100 W, inductive transformers: 20 to 420 VA, inductive transformers with LV LED 20 to 100 VA, when operating in the LED operating mode trailing edge: Connected load for HV LED lamps: typically 3 to 200 W, electronic transformers with LV LED: typically 20 to 200 W, ohmic-capacitive: 20 to 420 W, capacitive-inductive: not permitted, ohmic-inductive: 20 to 420 VA, ohmic and HV -LED: typically 3 to 100 W, ohmic and compact fluorescent lamps: typically 3 to 100 W, power can be expanded using power boosters, total length of load line: maximum 100 m, connection: screw terminals, 1 x 0.5 to 4 mm² or 2 x 0.5 to 2.5 mm² (solid and finely stranded without ferrule) and 1 x 0.5 to 4 mm² or 2 x 0.5 to 1.5 mm² (finely stranded with ferrule), total length of extension line: maximum 100 m, number of extensions: unlimited (extension insert 2-wire item no.: 1720 NE and button), maximum 5 (auxiliary insert 3-wire item no.: 1723 NE), ambient temperature: - 5 to + 45 °C, test mark: VDE, for attachments item no .: ..1700.., ..1700 P.., ..1701.., ..1701 P.., ..1750 D.., ..1751 BT.., ..1751 PBT.., . .17180.., ..17280.., ..17181.., ..17281.. and DWPM 17360.., for switching and dimming lighting