Exhaust air system surface-mounted fan - Ventilator for in-house bathrooms ER-AP 60 H

Exhaust air system surface-mounted fan - Ventilator for in-house bathrooms ER-AP 60 H – Maico – 0084.0154 – 4012799841548: Exhaust air system surface-mounted fan ER-AP 60 H nominal width 75mm, volume flow 61m³/h, color white, medium temperature -20... 40°C, mounting type surface-mounted, rated voltage 230V, mains frequency 50Hz, composition other, nominal current 0.13A, speed 9001/min, Material of the housing plastic, direction axial, protection class (IP) other, width 236mm, height 236mm, depth 217.5mm, version with humidity control and base load switching: Barrier-free product as it switches on/off automatically. Switch-on point: 60%, 70%, 80% or 90% relative humidity adjustable with jumper. Switch-off point: approx. 10% below the switch-on point (always a fixed value). Not speed controllable. Not suitable for second room ventilation. Manual operation possible via a switch, e.g. B. Switching on full load using the light switch. Standard circuit: Fan runs in base load operation, humidity control is active, full load operation when the switch-on point is exceeded, base load operation when the switch-off point is undershot. Further switching variants: fan operation with or without base load operation, manual switching on of full load, switching the fan on or off using a switch. Switching on the full load using the light switch and associated follow-up control (run-on time 6 minutes) of the fan. The fan always runs until the humidity in the room has fallen below the switch-off humidity, regardless of the circuit variant. Surface-mounted fan with G2 filter for ventilation of bathrooms, toilets or kitchens. With maintenance-free fire protection metal butterfly valve to prevent fire spread K90-18017. Housing can be rotated, thereby connecting the outlet nozzle to the top left or top right to the main line. Color traffic white similar to RAL 9016. Easy filter change without tools. Metal outlet nozzle DN 75/80 with metal butterfly valve with automatic release device. The extremely steep characteristic curve shows the high pressure capacity of the ER fans. Robust energy-saving capacitor motor. Maintenance-free, with ball bearings closed on both sides. Electrical plug connection for quick installation of the fan in the housing. All MAICO ER devices comply with protection class IP X5 and can therefore be installed in area 1 according to DIN VDE 0100-701, even with water jets. For details see planning information. Protection class II. General building authority approval, approval number: Z-51.1-45. Approval notices on request or on our homepage Volume flow characteristic and leakage air rate tested by TÜV Bayern eV Leakage air volume flow < 0.01 m3/h. Shaft level difference according to DIN 4109, tested by IAB Oberursel. With VDE mark.Article: ER-APB 60 H, version: humidity control, delivery volume: 35 m3/h / 61 m3/h, speed: 900 1/min / 1250 1/min, air direction: ventilation, speed controllable: no, SEC average: -20.23 kWh/(m2 a), rated voltage: 230 V, mains frequency: 50 Hz, power consumption: 11 W / 21 W, IMax: 0.13 A / 0.17 A, protection class: IP X5, mains supply cable: 5 / 1.5 mm2 location: wall / ceiling, installation type: surface-mounted, system type: decentralized, material: plastic, color: traffic white, similar to RAL 9016, weight: 2.2 kg, filter class: G2, fire protection: yes, shut-off device: integrated Metal butterfly valve with trigger device, connection diameter: 75 mm / 80 mm, width: 236 mm, height: 236 mm, depth: 217.5 mm, conveying medium temperature at IMax: 40 °C, follow-up time: 6 min / follow-up time when using an optional switch (e.g. light switch) available, sound pressure level: 33 dB(A) / 43 dB(A) / information in accordance with DIN 18017-3 with an equivalent absorption area AL = 10 m2 assung number: Z-51.1-45, nominal width: 75 mm / 80 mm