Lightning Controller Rail 3-pin. 255V - Combined arrester for power systems MCF25-NAR-TNC

OBO - MCF25-NAR-TNC - Lightning Controller Rail 3-pin. 255V - Combined arrester for power systems MCF25-NAR-TNC
Photo source: fig. possibly similar
Photo source: fig. possibly similar
MCF25-NAR-TNC 5096950 4012196585588 EAN/GTIN DE 64419409 WEEE

Our best price
13,539.09₹ excl. VAT
29,527.72₹ (-54.15% RRP***)

5-6 days* (IND)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Lightning Controller Rail 3-pin. 255V MCF25-NAR-TNC Network type TN, network type TN-C, network... more
Lightning Controller Rail 3-pin. 255V - Combined arrester for power systems MCF25-NAR-TNC – OBO – 5096950 – 4012196585588: Lightning Controller Rail 3-pin. 255V MCF25-NAR-TNC Network type TN, network type TN-C, network type TN-CS, number of poles 3, lightning impulse current (10/350 µs) 8.5kA, maximum continuous voltage AC 255V, nominal voltage AC 230V, protection level 1.5kV, protection level LN 1 .5kV, protection level N-PE 1.5kV, max. conductor cross-section rigid (single/stranded) 35mm², max MCF25-NAR Type 1+2 combined arrester for lightning protection equipotential bonding in accordance with VDE 0185-305 (IEC 62305) is suitable for use in the pre-counter area in accordance with VDE-AR-N 4100. The MCF25-NAR is used in buildings with overhead line feed in TN-C systems . It is installed on 40 mm busbars in the connection compartment on the mains side. The protection level of <=1.5 kV protects the end devices in the system. The lightning current discharge capacity is 25 kA (10/350) in total and 8.5 kA (10/350) per pole, follow current extinguishing up to 50 kA with a max. backup fuse up to 160 A gL/gG.
... more
Network shape TN yes
Mains form TN-C yes
Lightning impulse current (10/350 µs) 8,5 kA
Nominal discharge current (8/20) 20 kA
Highest continuous voltage AC 255V
Rated voltage AC 230V
Protection level 1.5 kV
Mounting Bus bar
Size other
Signaling on the device optical
IP protection) IP20

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Lightning Controller Rail 3-pin. 255V - Combined arrester for power systems MCF25-NAR-TNC"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.