Lightning Controller Rail 3-pin. with FS 255V - Combined arrester for power systems MCF38-NAR-TNC+FS

OBO - MCF38-NAR-TNC+FS - Lightning Controller Rail 3-pin. with FS 255V - Combined arrester for power systems MCF38-NAR-TNC+FS
Photo source: fig. possibly similar
Photo source: fig. possibly similar
MCF38-NAR-TNC+FS 5096973 4012196608812 EAN/GTIN DE 64419409 WEEE

26,623.85₹ excl. VAT
52,175.33₹ (-48.97% RRP***)

16-17 days* (IND)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Lightning Controller Rail 3-pin. m.FS 255V MCF38-NAR-TNC+FS TN network type, TN-C network type,... more
Lightning Controller Rail 3-pin. with FS 255V - Combined arrester for power systems MCF38-NAR-TNC+FS – OBO – 5096973 – 4012196608812: Lightning Controller Rail 3-pin. m.FS 255V MCF38-NAR-TNC+FS TN network type, TN-C network type, TN-CS network type, TN-S network type, TT network type, number of poles 3, lightning impulse current (10/350 µs) 12.5kA, maximum continuous voltage AC 255V , nominal voltage AC 230V, protection level 1.5kV, protection level LN 1.5kV, protection level N-PE 1.5kV, follow current extinguishing capacity 50kA, max. conductor cross-section solid (solid/stranded) 35mm², max. conductor cross-section flexible (finely stranded) 35mm², busbar mounting type , size other, remote signaling, optical signaling on the device, test class type 1 and 2, The MCF38-NAR combined arrester type 1+2 for lightning protection equipotential bonding according to VDE 0185-305 (IEC 62305) is suitable for use in the pre-counter area according to the VDEW guideline. The MCF38-NAR is used in buildings with lightning protection or overhead line feed in TN-C systems. It is installed on 40 mm busbars in the connection compartment on the mains side. The protection level of <=1.5 kV protects the end devices in the system. The lightning current discharge capacity is 38 kA (10/350) in total and 12.5 kA (10/350) per pole, follow current extinguishing up to 50 kA with a max. backup fuse up to 160 A gL/gG. The FS variant is also equipped with a potential-free changeover contact that enables remote signalling.
... more
Network shape TN yes
Mains form TN-C yes
Lightning impulse current (10/350 µs) 12.5 kA
Nominal discharge current (8/20) 20 kA
Highest continuous voltage AC 255V
Rated voltage AC 230V
Protection level 1.5 kV
Mounting Bus bar
Size other
Signaling on the device optical
IP protection) IP20

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Lightning Controller Rail 3-pin. with FS 255V - Combined arrester for power systems MCF38-NAR-TNC+FS"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.