Surge protection device type 1+2 - Combined arrester for power systems VG-BC DCPH-MS600

OBO - VG-BC DCPH-MS600 - Surge protection device type 1+2 - Combined arrester for power systems VG-BC DCPH-MS600
Photo source: fig. possibly similar
Photo source: fig. possibly similar
VG-BC DCPH-MS600 5088693 4012195613725 EAN/GTIN DE 64419409 WEEE

Our best price
32,426.28₹ excl. VAT
57,248.21₹ (-43.36% RRP***)

16-17 days* (IND)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Surge protection device type 1+2 VG-BC DCPH-MS600 DC network type, other network type, number of... more
Surge protection device type 1+2 - Combined arrester for power systems VG-BC DCPH-MS600 – OBO – 5088693 – 4012195613725: Surge protection device type 1+2 VG-BC DCPH-MS600 DC network type, other network type, number of poles 2, nominal voltage DC 600V, max. PV voltage 600V, max , mounting type pre-assembled in the housing, size other, signaling on the device optically, test class type 1 and 2, system solution for lightning current and surge protection of PV inverters with 2 separate inputs (MPP tracker) pre-assembled in the housing ready for connection. The arresters with error-resistant Y-circuit with 3 varistors for use in accordance with VDE 0100-712, pluggable with dynamic disconnection device and optical function display are characterized by a low DC protection level < 2.6 kV. The housing including cable gland set, with protection class IP65, made of polycarbonate is UV-resistant and suitable for outdoor use. 10 terminal points up to 6 mm² are already pre-installed per protective device. The simple, quick and safe connection of the DC cables via the feed-through terminal blocks enables optimal protection from the electrical inverter. The protective devices must be selected according to the maximum total open-circuit voltage (Uoc) of the PV string. If there is a risk of condensation forming due to wind, ice, temperature or sun, additional measures may be necessary!
... more

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Surge protection device type 1+2 - Combined arrester for power systems VG-BC DCPH-MS600"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.