Junction box with terminal strip - Surface mounted box 114x114mm X04 T LGR

OBO - X04 T LGR - Junction box with terminal strip - Surface mounted box 114x114mm X04 T LGR
Photo source: fig. possibly similar
Photo source: fig. possibly similar
X04 T LGR 2005198 4012196584444 EAN/GTIN DE 64419409 WEEE

1,121.15₹ excl. VAT

16-17 days* (IND)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Cable junction box with terminal strip X04 T LGR Max. conductor cross-section 4mm², terminal... more
Junction box with terminal strip - Surface mounted box 114x114mm X04 T LGR – OBO – 2005198 – 4012196584444: Cable junction box with terminal strip X04 T LGR Max. conductor cross-section 4mm², terminal equipment, square shape, mounting type wall/ceiling mounting, length 114mm, width 114mm, depth 78mm, stackable, number of entries 7, type of housing bushing knockout, material plastic, halogen-free, Surface untreated, color grey, degree of protection (IP) IP67, screwed cover fastening, sealable, rated insulation voltage Ui 750V, weather-resistant, operating temperature -25 ... 65°C, electrical lines are brought together in the robust junction boxes of the X series. They are suitable for indoor and outdoor use. The insertion openings are pre-stamped for easy cable routing. They are suitable for indoor and outdoor use. When used in unprotected outdoor areas, the junction box must be protected against direct weather influences (e.g. snow, wind, rain or sun). The junction box is tested according to DIN EN 60670-1, VDE 0606-1:2014 (EN 60670-1:2005 + Cor.:2007 + Cor.:2010 + A1:2013) and DIN EN 60670-22, VDE 0606-22 :2007 (EN 60670-22:2006). The junction box meets the requirements of the protection class test according to IP 67 according to DIN EN 60529, VDE0470-1:2014 (EN 60529/AC:2016). A 5-pin terminal strip is included in the scope of delivery.
... more
Max. Conductor cross section 4 mm²
Assembly other
Shape square
Mounting Wall / ceiling mounting
Introduction from the back no
Length 114 mm
Width 114 mm
Depth 78 mm
Stacking yes
Number of introductions 7
Type of housing feedthrough Prestamping
Material Plastic
Halogen free yes
Surface protection untreated
Colour gray
IP protection) IP67
Cover attachment screwed
Sealable yes
Rated insulation voltage Ui 750V
With shielding no
Weatherproof yes
Operating temperature -25..65 °C
Explosion-tested version no

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Junction box with terminal strip - Surface mounted box 114x114mm X04 T LGR"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.