Surge protection device for signal circuits PT-IQ-2X2+F-24DC-PT

Phoenix - PT-IQ-2X2+F-24DC-PT - Surge protection device for signal circuits PT-IQ-2X2+F-24DC-PT
Photo source: fig. possibly similar
Photo source: fig. possibly similar
PT-IQ-2X2+F-24DC-PT 2801264 4046356766470 EAN/GTIN DE 50738265 WEEE

15,671.78₹ excl. VAT
29,884.94₹ (-47.56% RRP***)

16-17 days* (IND)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Overvoltage protection device for signal circuits PT-IQ-2X2+F-24DC-PT Rated voltage DC 24 ...... more
Surge protection device for signal circuits PT-IQ-2X2+F-24DC-PT – Phoenix – 2801264 – 4046356766470: Overvoltage protection device for signal circuits PT-IQ-2X2+F-24DC-PT Rated voltage DC 24 ... 24V, maximum continuous voltage AC 21V, maximum continuous voltage DC 30V, rated discharge current (8/20) 10kA, rated load current 0.7A, protection level wire/ Wire 55V, protection level wire/earth 1000V, protection level wire/signal ground 600V, protection level signal ground/protective ground 600V, limit frequency 1.1MHz, type of installation other, connection 1 terminal, conductor monitoring, signaling on the device optically, overvoltage protection, consisting of protective plug and base element, with integrated multi-stage status display on the module, for two 2-wire floating signal circuits. Indirect grounding via gas discharge tube, HART capable.
... more
Rated voltage DC 24V
Highest continuous voltage AC 21V
Highest continuous voltage DC 30 V
Nominal discharge current (8/20) 10 kA
Nominal load current 0.7 A
Protection level wire / core 55V
Protection level core / earth 1000V
Protection level wire / signal ground 600V
Protection level Signalground / Protectiveground 600V
Cut-off frequency 1.1 MHz
Mounting other
Connection 1 Clamp
SPD yes
With telecommunication contact no
Signaling on the device optical
Explosion-tested version no

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Surge protection device for signal circuits PT-IQ-2X2+F-24DC-PT"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.