Overvoltage protection - Surge protection for signal systems S-PT-EX-24DC-1/2

Phoenix - S-PT-EX-24DC-1/2 - Overvoltage protection - Surge protection for signal systems S-PT-EX-24DC-1/2
Photo source: fig. possibly similar
Photo source: fig. possibly similar
S-PT-EX-24DC-1/2 2800035 4046356411011 EAN/GTIN DE 50738265 WEEE

9,388.93₹ excl. VAT
17,904.22₹ (-47.56% RRP***)

16-17 days* (IND)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Overvoltage protection S-PT-EX-24DC-1/2'' Rated voltage DC 24... 24V, maximum continuous voltage... more
Overvoltage protection - Surge protection for signal systems S-PT-EX-24DC-1/2 – Phoenix – 2800035 – 4046356411011: Overvoltage protection S-PT-EX-24DC-1/2'' Rated voltage DC 24... 24V, maximum continuous voltage AC 25V, maximum continuous voltage DC 36V, rated discharge current (8/20) 0.26kA, protection level wire/wire 65V, protection level wire /Earth 1100V, limit frequency 70MHz, type of installation other, connection 1 other, signaling on the device without, overvoltage protection for a floating signal circuit in the screw-on module with protection class IP67 for sensor heads, connection ½ inch 14 NPT. Tested according to types of protection in hazardous areas Ex d / Ex tD / Ex ia IIC / Ex iaD. Is suitable for use in the fieldbus system according to the FISCO concept.
... more
Rated voltage DC 24V
Highest continuous voltage AC 25 V
Highest continuous voltage DC 36 V
Nominal discharge current (8/20) 10 kA
Protection level wire / core 65 V
Protection level core / earth 1100 V
Cut-off frequency 70 MHz
Mounting other
Connection 1 other
SPD no
With telecommunication contact no
Signaling on the device without
Explosion-tested version yes

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Overvoltage protection - Surge protection for signal systems S-PT-EX-24DC-1/2"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.