Electronic universal touch dimmer ETD 2

ETD 2 ETD209 4046929201124 EAN/GTIN DE 49141360 WEEE

Our best price
5,338.46₹ excl. VAT
7,667.88₹ (-30.38% RRP***)

5-6 days* (IND)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Universal touch dimmer REB m.Einz.,afLED/ESL ETD 2 operating mode push button, dimming phase cut,... more
Electronic universal touch dimmer ETD 2 – Schalk – ETD209 – 4046929201124: Universal touch dimmer REB m.Einz.,afLED/ESL ETD 2 operating mode push button, dimming phase cut, dimming phase cut, load type universal and LED retrofit, extension input, light value memory, can be used with button, can be used with motion detector, can be used with presence detector, can be used with timer/timer , REG mounting type, click mounting type, plastic material, halogen-free, color grey, RAL number (similar) 7035, transparent, rated voltage 230 ... 230V, frequency 50 ... 50Hz, control voltage 8 ... 230V, rated power 0 .. 500VA, connection type screw terminal, core cross-section 0.5 ... 4mm², device width 18mm, device depth 55mm, With the electronic universal touch dimmer ETD 2, a wide variety of light sources (LED energy-saving light bulbs, LV halogen lamps with Tronic or wound transformers, HV halogen lamps). In addition to automatic detection for wound transformers (dimming type auto), the dimming type can also be set manually to leading or trailing edge (possibly necessary for lamps with electronic ballasts). A special ESL dimming mode also creates an ignition and warm-up phase for compact fluorescent lamps (energy-saving lamps). The ETD 2 has two additional isolated inputs, which are also suitable for group control. It can also be operated directly via a front button. All 3 inputs and the front button are individually programmable. This means that the dimmer can be switched and dimmed with just 1 button, or with 2 separate buttons. Pure switching functions are also available. In addition, memory, snooze function, running time, soft on ramp, soft off ramp and start brightness can be specified, dimensions: 18x55mm, 230V AC, 0-500W
... more
Of operation Push button
Dimming Phase control yes
Dimming Phase section yes
Series dimmer no
Load type universal and LED retrofit
Extension input yes
Light value memory yes
Suitable with button yes
Usable with motion detector yes
Suitable with presence detector yes
Usable with timer / timer yes
Mounting REG
Mounting Click-in fixation
Material Plastic
Halogen free yes
Colour gray
RAL number (similar) 7035
Transparent yes
Nominal voltage 230V
Frequency 50 Hz
Control voltage 8..230 V
Connection Screw terminal
Core cross-section 0.5..4 mm²
Device width 18 mm
Device depth 55 mm

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Electronic universal touch dimmer ETD 2"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.