Energy meter IEM3310 3P 125A - Direct kilowatt-hour meter 125A A9MEM3310

Energy meter IEM3310 3P 125A - Direct kilowatt-hour meter 125A A9MEM3310 – Schneider Electric – 3606480696398: Energy meter IEM3310 3P 125A A9MEM3310 Electronic meter type, rated current (In) 125A, maximum current (Imax) 125A, rated voltage (Un) NL 100... 277V, rated voltage (Un) LL 480... 480V, frequency 50... 60Hz, accuracy class B, Polart three-wire/four-wire, direct measurement version, active power energy type, suitable for purchase/delivery, one-tariff tariff version, Measuring Instruments Directive approval, electrical pulse output, pulse type S0, pulse rate 0... 1000Imp/kWh (kvarh), digital display type, installation type installation , Width in modules 7, Interface design without, Number of digits 9, Degree of protection (IP) IP20, Degree of protection (NEMA) 1, Acti 9 iEM3000 series. iEM3310 energy meter, 3-phase. Output_S0: 1, MID: Yes, max. rated current: 125 A. Three-phase meter for direct measurement up to 125 A. Display: Fully graphic LCD display for simultaneous plain text display of menu item/measuring category, measured value, unit and active tariff. Partial counters are displayed or communicated with the time stamp (date & time) of the last reset. Measuring function: total active energy meter without reset function and partial active energy meter with reset function. Further ordering options: Billing metering: MID-compliant according to EN 50470-3 (formerly PTB approval), total and per phase active energy meter. Degree of protection: Front IP 40, housing IP 20 (Note on MID variants: for conformity with the European Measuring Instruments Directive MID 2004/22/EG, the measuring device must be installed in a cabinet or housing with degree of protection IP51 or better).