The following 61 products have been found matching your search "Baulmann":

Item/s (61)

Categories | Others (6)

Found in manufacturer pages: 2

Found in shop categories: 4

Low-voltage transformer - It is often not enough to mount lightbulbs in the ceiling, in the wall, in the stairs or in the closet. Especially with built-in lights, transformers are often required, which reduce the voltage to 12 volts or another value. But why are transformers necessary at all? In this text you will learn more about low-voltage transformers, how they are used and which criteria you should consider when purchasing.What are lighting transformers?Low-voltage transformers are important operating devices for lights. These are devices for converting a certain voltage to another voltage. In many cases, the 220 volts at the input of the device is converted to 12 volts at the output of the device. On the one hand, this reduction serves to ensure safety, because a 12 volt voltage does not pose a danger to life and limb when touched. This also ensures that the lamp does not fail in the event of voltage peaks. In other words: a transformer protects against short circuits and overheating and is a device that makes it possible to switch the light on and off.Image: LEDVANCE HTL225/230-240 Halotronic transformerDo transformers affect the lifespan of the lamp?How long a lamp works depends on its quality, frequency of use and duration of use. Frequent switching cycles have an effect on the service life, especially with conventional light sources. Continuous operation of the light bulbs can also lead to wear and tear and premature failure. In principle, a transformer connected in front of it has no influence on this. However, the device 'smoothes out' fluctuations in the energy supply and can thus positively influence the service life of a classic light bulb. In this regard, it should be noted that even transformers can burn out over time. However, this happens very rarely and also depends on the quality of the device. In times when conventional light sources are increasingly being replaced by modern and long-lasting LED technology, the question of consumption and efficiency is often asked in contrast to lifespan.Is a 12 volt bulb more economical than a 220 volt bulb?It is widely believed that 12 volt incandescent lamps save electricity compared to 220 volt incandescent lamps. However, that is not true. Saving electricity depends on the power and not on the voltage.How do I find the right transformer for my lighting?Because transformers are commonly used with recessed lights, we'll stick with this type of lighting. It depends on the lamps used which transformer you need. For safety reasons, the use of low-voltage lights is strongly recommended, especially in rooms with high humidity. If you use LEDs, you need a different transformer than with classic halogen lamps. So before you choose one or the other transformer, you have to decide on a specific light source. The service life of LEDs is usually more than 50,000 hours. These are therefore much more durable than comparable halogen lamps. In addition, the heat generated by LEDs is significantly lower, which is an advantage for built-in lights without air circulation. Disadvantages of LEDs are the higher price and the special nature of the light emission. Their light is generated by a directed luminous flux, which can quickly lead to signs of fatigue. Therefore, LEDs are mainly used as accent lighting in the background (in cupboards and shelves, as an orientation light on the stairs). A lamp with halogen lamps is typically recommended for the basic lighting of a room.Basically, we distinguish between low-voltage transformers:Devices that have a winding and work by means of inductionDevices that are exclusively electronically controlled Transformers with winding are primarily used with halogen lamps. These consist of two copper windings (coils), which interact with each other through an electromagnetic field and can thus reduce the voltage. The electronic transformers reduce the mains voltage using electronic circuits. These devices are therefore the newer generation and offer the following advantages over conventional transformers:light and compacthigh degree of protection against short circuitsalmost silent operationProtection against overload and overheatingSoft start possible With these features, longevity is achieved for both the transformer and the halogen lamps. Already knewElectronic transformers have an efficiency of over 95%. Transformers with coils achieve an efficiency of around 80%. When using LEDs you need a different type of transformer. Please note that these devices are not interchangeable with the transformers for halogen lamps, even if they have the same nominal power and output voltage. In a halogen lamp, the filament serves as the light source. The lighting of an LED is based on completely different physics. Here, electric current flows through a diode and releases some of the energy in the form of light photons. This difference in the generation of light places individual demands on the respective electronic transformers, for example:Transformers for halogen lamps generate an AC voltage. This has positive and negative pulses and is not suitable for continuous operation of an LED. An LED is operated with direct current. Although many LEDs have a rectifier, the conversion can lead to increased heat generation and thus to a shorter service life.For example, in the case of transformers for halogen lamps, the average output voltage is 12 volts. In reality, however, this value is not constant and can vary up and down. These can be voltage peaks when switching or depend on the mains voltage at the input, the connected load and the ambient temperature. A halogen lamp can cope with these fluctuations without being damaged. An LED cannot do this.LEDs have significantly less power than halogen lamps. An electronic transformer for halogen lamps requires a certain base load in watts in order to function properly. If this base load is not reached, the light flickers, shines too weakly or not at all.Is it possible to dim halogen lamps and LEDs with a transformer?Regardless of whether you are using a conventional or an electronic transformer, dimming 12 volt halogen lamps is usually always possible without any problems. It is only important that the individual components are compatible with each other.TIPTypically, so-called leading edge dimmers are combined with conventional transformers, whereas trailing edge dimmers are used for electronic transformers. If you are not sure, choose a universal dimmer from our range.If you want to dim LED lamps, all interacting components must be marked accordingly. This means that both the transformer and the LEDs themselves, as well as any ballast that may be required, must be dimmable.Which low-voltage transformers does the eibabo® shop offer?At eibabo® you will find an extensive range of lights and the right low-voltage transformers for your lighting installation. In addition to dimmer transformers and DALI switching power supplies, we also carry low-voltage transformers, plug-in transformers, safety transformers, electromagnetic transformers, power supplies, ballasts and Tronic transformers. Most of the devices can be used for direct installation as well as for flush mounting. You get exactly the low-voltage transformer you need in the well-known high processing quality as well as with optimized efficiency and a perfect range of functions. We only offer high-quality products from well-known and well-known manufacturers such as Jung, EVN Lichttechnik, Houben, Paulmann, Brumberg Leuchten, Hera, Philips lamps, LEDVANCE, ABB Stotz, LTS Licht&Lighten as well as Oligo, Relco, BEGA Gantenbrink, Berker and Zumtobel Licht.  Catalogue content:In this eibabo® catalogue Light control > Transformer for low voltage light system/low voltage halogen lamp you will find items from the following product groups:Item overview:Ambient lightCable systemControl gearControl unitHalogen transformerInterior lightInterior lightingLamp transformerLow voltageMounting accessoriesOperating devicesOutdoor lightPlug transformerSafety transformerSecurity converterSwitching power supplyTransformerfrom the following manufacturers:Manufacturer overview catalogue Low-voltage transformer:ABBBEGA GantenbrinkBrumbergEVNGiraHellumHoubenJungLEDVANCENobileOligoPaulmannRelcoScharnberger+Has.SLVTrafo-Technik-Hoppecke
Accessories technical lights - Here in the shop, a large part of our range consists of lights and lighting systems for home, leisure, trade and industry. But what happens if you accidentally break the glass or cover of a lamp you bought from us? Don't worry, we won't leave you in the dark. There are also suitable accessories or inexpensive spare parts for many lights from the eibabo range. Because repairing is easy on the wallet and less waste is produced. Just use our powerful search. Once you have found the right product and placed it in the shopping cart, you can choose from numerous secure payment methods and monitor the delivery status of your goods at any time using our Track & Trace shipment tracking.Catalogue content:In this eibabo® catalogue Accessories for lighting > Light technical accessories for luminaires you will find items from the following product groups:Item overview:Acrylic glassBarndoors for spotlightBlindBlinding flapCoverCover discCovering capDecor elementDimmingDiscFibre optic cableFibre opticsFilterFloodGlassGridInstallation kitLight technical accessories for luminairesMirrorNon-adjustable trimOpticsPlug-on reflector for energy-saving lampProtective tube reflectorRingScreenScreeningSpotUV filterfrom the following manufacturers:Manufacturer overview catalogue Accessories technical lights:AbalightAlbert LeuchtenArcliteAura LightBarthelmeBaulmannBEGA GantenbrinkBrilonerBrumbergBusch JaegerCeagElstein-WerkESYLUXEVNFischer & HonselHeraIDVIlluminaIndexaLedlenserLEDVANCELichtlineLTSMeyer + SohnNorkaOligoOpple LightingPerformance in LightPhilips LichtPhoenixPrachtRegioluxRidi-LeuchtenRZBScharnberger+Has.Schmidt-StrahlSchmitz-LeuchtenSchneiderSchuchSignify PLSSitecoSLVSteinelTriluxTrio-LeuchtenWaldmannWitte + SutorZumtobelZweibrüderZweibr?der
Downlight - Are you interested in downlights, recessed wall lights or LED spotlights for installation in a ceiling? What options do you have for setting accents in your room? Find out here what the differences are and what you should look out for when buying. In the eibabo technology store you can get downlights in different shapes and sizes, as complete recessed lights or as individual chassis. Some bulbs are included in the scope of delivery.What are downlights?Downlights are subtle lights that can have a big impact. They are ideal for all rooms in which accentuated or area lighting is required without the luminaire itself being the focus. Downlights are installed in the ceiling and create a stylish and effective ambience. The difference to classic recessed spotlights lies in the relatively wide beam angle.Where can you use downlights and recessed spotlights?Downlights or recessed spotlights are available in different versions. These can be perfectly adapted to the respective environment. There are models with a round or square frame, different light colors and different light intensities. So you can find exactly the lighting that suits your space and your needs. Use downlights for general room lighting. For example, they can be installed in the kitchen above the stove or worktop. Downlights are also a good choice in hallways and stairwells, as they ensure optimal illumination of the route. In rooms with high ceilings, such as offices or hotels, downlights ensure pleasant and even illumination without glare. Downlights are also ideal in the area above the washbasin with mirror. TIP:If you want to illuminate an area, you prefer downlights. If you want to set accents, use recessed spotlights. Recessed spotlights are often integrated into pieces of furniture and produce a narrow cone of light with a sharper contrast between light and shadow. Recessed spotlights are ideal for illuminating pictures in galleries or for emphasizing dark areas. Recessed spotlights are easy to install and in many cases replace conventional pendant lights. Due to their compact size and the unobtrusive design, downlights and recessed spotlights adapt perfectly to the environment and turn every room into a stylish place.What should be considered before buying downlights and recessed spotlights?Downlights and recessed spotlights are permanently attached to the building. These cannot be easily removed like a floor lamp or desk lamp. So plan carefully. Subsequent changes can be complex.Mounting, installation depth and fire protectionWith flush mounting, the light is built into the wall or ceiling and only the cover frame remains visible. Individual lights and series built-in lights can be used. The installation depth varies depending on the design. There are flat models that are only 1 to 2 cm deep and deeper models that are 6 cm or more. Pay attention to the heat development. Classic lamps get hot. Good rear ventilation is used for fire protection. Heat development is significantly lower with LED lights. locationIf you want to install recessed lights in the bathroom, sauna or laundry room, they should be suitable for use in humid environments. Please refer to the product description to see whether your desired model meets the necessary requirements. Pay particular attention to the IP protection class. Image: EVN PC650N91602 P-LED recessed ceiling lightpower supplyIn the case of permanently installed downlights, power is usually supplied via the house installation. Would you like to opt for a high-voltage system or a low-voltage system? Depending on this, external or integrated power supplies are required. Number of lights and positioningFirst of all, you should think about which areas of the room you want to illuminate. The positioning of the recessed spotlights depends on the existing incidence of light through windows and other light sources. The number of lights is determined by the type and size of the room. As a rule, you install at least 2 to 3 recessed spotlights per square meter of room area. Make sure that the recessed spotlights and ceiling spotlights are not too close together. Otherwise the light would not be evenly distributed and shadows may form. The beam angle is also important for ceiling spotlights, as this determines how the light is distributed in the room. A narrow angle provides direct lighting, while a wide angle spreads the light more diffusely. Depending on the atmosphere you want, you should choose the right beam angle. Different light needsSome conventional lamps and LED recessed spotlights are dimmable. These offer the advantage that you can adjust the brightness depending on the situation. The brightness of the lighting should be selected so that it is comfortable for the desired atmosphere. Make sure that there are minimum legal requirements when it comes to lighting workplaces, for example. The color of the lighting should also be chosen carefully. Lighter colors like white and blue can brighten up a room and make it look friendlier or create a cool, fresh atmosphere. Warm colors such as yellow or orange are ideal for creating a cozy and cozy atmosphere. Experiment with different colors to find the right lighting for your space. flexibilityFixed lights are less flexible than other light sources. But here, too, you have the option of varying the direction of the beam angle using swiveling inserts. What advantages do LED downlights and LED recessed spotlights offer?You can install LED recessed spotlights and LED downlights almost anywhere. These are compact and provide a pleasant and stylish atmosphere in every home as general room lighting or as accent lighting. Many LED recessed spotlights are dimmable, so you can adjust the light intensity to your liking. There are now hardly any limits when it comes to the color of light. The biggest advantage of LED technology is its energy efficiency. Compared to conventional light bulbs, LEDs consume very little energy and save money. High-quality LEDs have a long service life and do not need to be replaced as often.Please noteThe illuminant is already integrated in many LED recessed spotlights. If you want to influence the brightness and light color individually, please choose a model with a changeable lamp.Recessed LED lights, where you can change the bulb, usually have a GU10 socket. When buying the lamp, make sure it has a G10 base and that the specified maximum power is observed.Should I opt for low-voltage technology for downlights and recessed spotlights?Is high-voltage technology dangerous and is low-voltage technology better? Whether LED or conventional light sources, there is the right technology for every taste when it comes to downlights and recessed spotlights. Both high-voltage technology and low-voltage technology have advantages and disadvantages. Incidentally, you have not only been faced with this choice since LEDs came into existence. Even with the halogen lamps you could choose between 230V and 12V. What is high voltage?High voltage is not high voltage. According to the general definition, high voltage begins at 1,000 volts. Low-voltage recessed spotlights are mostly operated with a voltage of 12 volts, some LEDs work with an operating voltage of 24V. With regard to the actual light output, there are no significant differences.high voltage:no extra transformer is required, LEDs have an integrated power supplychanging between LED and conventional is easyhigher power loss and more waste heat shortens the service life of the lampsthe safety requirements are higher (fire protection, installation) low voltage:LEDs have less power loss and higher efficiencythere is less waste heat12V low voltage is less dangerous for wet rooms and outdoor facilitiesa suitable power supply unit is requiredhigher planning effort for more complex installations Which of the two technologies you choose is a question of personal taste, the location and the existing technical requirements.  Catalogue content:In this eibabo® catalogue Luminaires > Downlight/spot/floodlight you will find items from the following product groups:Item overview:A surface lightAccent lightingArea lightingBuild-up potCarrying caseColor changeCompact spotlightDepartment store lightEntrance lightHeadlight bulbInfrared sensorInterior lampInterior lightLightstreamLow-voltage spotlightMounted spotlightOutdoor lightsOutdoor spotlightPatio lightPower Rail SpotlightRecessed ceiling spotlightSpotlightSpotlightHeadlampSpotlightsHeadlightsFloodlightSquare lightStarry skyToledoFlatWallwasherfrom the following manufacturers:Manufacturer overview catalogue Downlight:AbalightArcliteAura LightBachmannBarthelmeBaulmannBEGA GantenbrinkBrilonerBrumbergBöhmerEgloESYLUXEVNFischer & HonselHeraIDViiMIlluminaKonstsmideLEDVANCELTSOligoOpple LightingPaulmannPerformance in LightPhilips LichtRegioluxRidi-LeuchtenRZBSchmitz-LeuchtenSignify PLSSitecoSLVSun CracksTriluxWitte + SutorZumtobelZumtobel Group
Close filters
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
from to

1 From 6
No results were found for the filter!
RECOMMENDED
Short rod 50W - Downlight/spot/floodlight 1x50W 971.1229
811.81₹ excl. VAT

*

Short rod 50W - Downlight/spot/floodlight 1x50W
Paulmann
| 971.1229
RECOMMENDED
RECOMMENDED
RECOMMENDED
Halogen socket - Lamp holder G4/GX5.3/G6.35 218.9
325.28₹ excl. VAT

*

Halogen socket - Lamp holder G4/GX5.3/G6.35
Paulmann
| 218.9
RECOMMENDED
RECOMMENDED
RECOMMENDED
3D
Busch Jaeger - 6256/1-WL - Radiator thermostat WL-Basic - Heating actuator for home automation 6256/1-WL
6,216.03₹ excl. VAT

*

plus shipping
(8,783.62₹ RRP***)
Radiator thermostat WL-Basic - Heating actuator for home automation
Busch Jaeger
| 6256/1-WL
RECOMMENDED
3D
RECOMMENDED
ITW Spit - 811242 - Slot cutter SPIT D90 with 1 SET - Wall chaser 2500W 811242
128,922.38₹ excl. VAT

*

plus shipping
(165,923.27₹ RRP***)
Slot cutter SPIT D90 with 1 SET - Wall chaser 2500W
ITW Spit
| 811242
RECOMMENDED
Doepke - DPB 32 01-110 - Protection Box In32A, Out16A/32A - CEE-Socket combination portable IP44 DPB 32 01-110
135,875.22₹ excl. VAT

*

plus shipping
(191,936.66₹ RRP***)
Protection Box In32A, Out16A/32A - CEE-Socket combination portable IP44
Doepke
| DPB 32 01-110
RECOMMENDED
Doepke - DPB 32 01-010 - Protection Box In32A, Out32A - CEE-Socket combination portable IP44 DPB 32 01-010
132,688.93₹ excl. VAT

*

plus shipping
(176,581.73₹ RRP***)
Protection Box In32A, Out32A - CEE-Socket combination portable IP44
Doepke
| DPB 32 01-010
1 From 6