Surge group switch 1 + 1 NO 16A EGS12Z-UC

Surge group switch 1 + 1 NO 16A EGS12Z-UC – Eltako – 21200401 – 4010312107737: Impulse group switch 1+1S 16A EGS12Z-UC electronic function group switch, DIN rail mounting, width in modular units 1, installation depth 58mm, number of contacts as NO contact 2, number of contacts as NC contact 0, number of contacts as changeover contact 0, control voltage 1 8 ... 230V, type of control voltage 1 AC/DC, frequency of the control voltage 1 50 ... 50Hz, rated switching current 16A, supply voltage 8 ... 230V, type of voltage of the supply voltage AC/DC, max. switching current (cos phi = 0.6) 2A, manual operation possible, actuator UC. Impulse group switch for central control for 1 motor or for motor relays. Standby loss only 0.05 to 0.4 watts. This surge group switch converts the commands from the sensor relays or from switches and buttons and switches a motor, motor isolating relay MTR12-UC or DC motor relay depending on the setting of the rotary switch on the front. The control voltage at terminals A3 to A8 must have the same potential as the supply voltage. The functional principle of this impulse group switch is that, on the one hand, up, stop, down, stop (contact 1 closed - both contacts open - contact 2 closed - both contacts open) can be controlled in pulses, and on the other hand up or down can be specifically selected via additional control inputs can. Dynamic refers to control inputs where a pulse of at least 20ms is sufficient to close a contact. A control input is static if the contact is only closed as long as the control command is present. The designations up and down apply to roller shutters, blinds and roller blinds.