Safety relay emergency stop - Safety relay 0...26,39999999V AC/DC ESR5-NO-41-24VAC-DC

Safety relay emergency stop - Safety relay 0...26,39999999V AC/DC ESR5-NO-41-24VAC-DC – Eaton – 118701 – 4015081168415: Safety relay emergency stop ESR5-NO-41-24VAC-DC Basic device design, Suitable for monitoring position switches, Suitable for monitoring EMERGENCY STOP circuits, Design of the electrical connection Screw connection, DIN rail mounting possible, Rated control supply voltage Us at AC 50 Hz 0 .. 26.4V, Rated control supply voltage Us at AC 60 Hz 0V, Rated control supply voltage Us at DC 0V, Type of voltage for actuation AC/DC, With removable terminals, Evaluation of the inputs with one and two channels, With start input, With feedback circuit, OFF-delay 0s, Number of outputs , safety-related, instantaneous, contact-based 4, number of outputs, safety-related, delayed, contact-based 0, number of outputs, safety-related, instantaneous, semiconductor 0, number of outputs, safety-related, delayed, semiconductor 0, number of outputs, signaling function, instantaneous, contact-based 1, number of outputs, signaling function, delayed, with contacts 0, number of outputs, signaling function, undelayed, semiconductor 0, number of outputs, signaling function, delayed, semiconductor 0, category according to EN 954-1 1, safety type according to IEC 61496-1 without, stop category according to IEC 60204 0, performance level according to EN ISO 13849- 1 Level c, SIL according to IEC 61508 1, with TÜV approval, with UL approval, width 22.5mm, height 99mm, depth 114.5mm, safety relay for implementing the basic functions emergency stop / emergency stop / protective door, single-channel operation , supply voltage 24VDC or 24VAC 50/60Hz, 4 enabling current paths (IEC/EN 60204 stop category 0), 1 signaling current path, protection against accidental contact according to EN 50274 finger- and back-of-hand-safe when operated vertically from the front, suitable for PL c, cat. 1 according to EN ISO 13849-1 / SILCL 1 according to IEC 62061 / SIL 1 according to IEC 61508 / PL e only possible with the help of fault exclusions