Motion detector 130 degrees - Movement sensor 130° 8m RC 130i weiss

Motion detector 130 degrees - Movement sensor 130° 8m RC 130i weiss – ESYLUX – EM10015014 – 4015120015014: Motion detector 130 degrees RC 130i white Motion detector design, sensor type passive infrared, creep protection/rear field monitoring, scanning angle 130°, optimal installation height 2.5m, stairwell monitoring, max. range to one side 20m, max. frontal range 8m, detection field diameter on the floor 20m, remote controllable , Response sensitivity adjustable, Response brightness adjustable, Teach function for response brightness, Suitable for ceiling mounting, Suitable for wall mounting, Surface mounting type, Connection type screw terminal, Material plastic, Material quality thermoplastic, Surface untreated, Surface finish matt, Color white, RAL number (similar) 9010, degree of protection (IP) IP54, type of voltage AC, frequency 50 ... 60Hz, nominal voltage 230V, min. duty cycle 15s, max. duty cycle 30min, switch-off delay 5s, switch-on delay 0s, horizontal detection angle 0 ... 130°, sensor swivel range, horizontal 0°, sensor swivel range, vertical 0°, response brightness 2 ... 2 500lx, max. switching capacity 2300W, temperature -25 ... 55°C, number of switching zones 1, max. inrush current 100A, control current 0mA, width 78mm, height 105mm, depth 135mm, motion detector with 130° detection area and large range. 360° creep-under protection for complete detection, can be switched off by remote control. Programmable by remote control, e.g. B. Permanent light ON/OFF and automatic read-in function of the current light value. Fixed factory program ensures immediate operational readiness. Avoidance of operating errors through integrated selector switch for test function/remote control/potentiometer setting. One-hand socket assembly. Double membrane cable entry. Concealed terminal base with large wiring space. Range adjustment of the sensor with additional focus LED as an adjustment aid. Retractable adjustment elements prevent unintentional adjustment of the parameters. Wall or ceiling mounting is possible without accessories thanks to the swivel joint. Hide individual areas with the enclosed cover cap (can be cut to size). Special base for inside and outside corner mounting as an accessory.