The following 7500 products have been found matching your search "Outlet":

Item/s (7500)

Categories | Others (10)

Found in manufacturer pages: 1

Ridi-Leuchten - In this catalog of the eibabo® shop from eibmarkt® you will find products from the Ridi Group. These are mainly articles for the installation of lighting systems such as ceiling outlet boxes, mounting rail hangers, mains feeds, gear trays, LED panels, mirror lights, pendant lights, light strips, recessed lights, cable pendants and fastenings, diffuser lights, hangers, cables and assembly material. Ridi is therefore a company that specializes in the manufacture of lights for private and commercial use. The product range also includes surface-mounted lights, floor lamps, linear lighting systems and recessed spotlights, industrial and hall reflector lights, as well as lights with a higher degree of protection and emergency lighting. As early as 1957, just a few years after company founder Richard Diez set up his own electrician in Jungingen, the company began producing its first A1 kitchen lights. Shortly thereafter, the range was expanded to include living room lights. Since then, the company has continued to develop, but its headquarters are still in Jungingen. Additional production sites were set up over the years in Zeuthen, Rellingen and Lodz. With sales companies in Spain, Italy, Belgium, Austria, France, Great Britain, Poland, the Netherlands and Switzerland, the Ridi Group is present throughout Europe. In addition, the company has set up its own LED department, which is dedicated exclusively to the development of LEDs, special construction and in-house assembly. The main areas of application for the Ridi solutions include office complexes as well as municipal and privately run facilities such as rehabilitation clinics, health resorts, museums, libraries, retirement homes, educational institutions or dormitories for schoolchildren and students. But Ridi lights can also be found in trade, sports and leisure facilities and in industry. Opt for the high-quality lights from the Ridi brand and the eibabo® technology store will deliver the products to you quickly and reliably anywhere in the world.

Found in shop categories: 9

Cable outlet ceiling lights - If concrete walls and ceilings have to be poured as part of the construction of a building, it makes sense to create the necessary conditions in advance so that the planned electrical installation can be quickly and easily installed later. For this purpose, you can get a wide variety of modules in the eibabo online shop that are required to prepare empty pipes and cable outlets in walls and ceilings. Brief explanation: You know where sockets and other devices have to be installed in the concrete wall that will be poured later. So you create a kind of blind system of pipes and wall connections inside the formwork before the concrete is poured into the formwork. After the hardening and removal of the formwork, the desired concrete wall or concrete ceiling remains with the embedded preparation for the insertion of cables and lines. All modules for creating a complete pre-installation are available here in the catalog at a reasonable price.Catalogue content:In this eibabo® catalogue Connection devices > Junction box for ceiling luminaire you will find items from the following product groups:Item overview:Cable boxCable outlet for ceiling lightsCeiling hookCeiling manifoldCeiling moldingCeiling outletCeiling outlet for flat cableCeiling outlet grommetCeiling outlet with hook screwCeiling transitionEnd and transition sleeveEnd clampFlat cable ceiling outletFlush-mounted ceiling outletJunction boxJunction box for ceiling luminaireLamp boxPipe bend supportPipe supportPlastic clampScrew hookTerminal boxTransition boxTransition grommetWall and ceiling bendsWall elbowWall outletWall transitionfrom the following manufacturers:Manufacturer overview catalogue Cable outlet ceiling lights:ABBKaiserKleinhuisNiedaxOBOSpelsberg
Cover switch-button-dimmer - Do you prefer plain and simple covers for switches and buttons? Or may it also be something extravagant? We offer a huge range and show you what colours, shapes and styles are there? At eibabo® you will find blind covers and switch covers that make our home functional, comfortable and individually adjustable. This includes covers for room temperature controllers and dimmers from over 20 brand manufacturers at top conditions.PICTURE: Busch Jaeger 2504-2014 blind rockerWhat are covers for switches and buttons?Our life is hardly imaginable without power connections in the house. We operate light switches and plug sockets several times a day. Anyone involved in the planning and construction of a building knows the importance of covers for switches and sockets. Trouble-free functionality, simple design, durability and safety are what count in everyday contact with the interfaces to the power grid. How are these devices constructed? Roughly speaking, conventional switches and buttons consist of an insert, a frame and a cover.The insert consists of the switching technology or the technology for the button and is installed in a switch box.The cover frame forms the outer ring of a socket, button, switch or other insert.The covers fill the frame and ensure that we can safely operate switches, buttons or sockets. The manufacturers have adjusted to the needs of their customers. These offer switch programs with which you can determine the appearance of your switches, buttons and sockets yourself. Covers are available as:Rocker switches, rocker switches and double rockers for lights, blinds, heating and the likeCentral plate for sockets, network sockets and other mediaCable outlet or key switchBlind cover without functionalityCentral disc for dimmers, sensors, temperature controllers Can covers for switches and buttons be combined with frames from other switch ranges?The answer is yes and no. Inserts, frames and covers are standardized, but the details can differ. Why is that? The standard refers to DIN 49073:2007-09. This prescribes the typical dimensions of a switch box (diameter: 60 mm or 68 mm. Depth: 40 mm to 66 mm). The switch ranges of all manufacturers fit into your existing and standardized switch boxes. The situation is different if you want to combine different switch ranges. Although all switch series correspond to the basic installation standard, there are differences in design. As a result, some series are not compatible with other series. Particularly exclusive switch programs are usually also not compatible with other programs. These are usually made of glass, brass, brushed aluminum or stainless steel. TIP:When combining white parts, make sure they have a matching color number (RAL) and the same surface treatment. There may be minor differences. Some covers for buttons and switches match cover frames from other series and manufacturers in terms of shape and size. This allows you to design the control elements in your living room or work area very individually. If you want to combine, we recommend matching the inserts and cover first. In many cases, you will receive these devices as a matching set. This results in the choice of a suitable framework. Many manufacturers produce standardized frames with a cut-out of 55x55mm or 50x50mm. These fit onto correspondingly standardized covers and inserts. Then swapping, combining or varying is possible. If you are not sure, please look at the product description and compare the dimensions given.How do I remove a cover for switches and buttons?You can replace covers for sockets and switches yourself. Please pay attention to your safety, because after removing the covers the current-carrying contacts are exposed. When working with electricity, please disconnect the power supply beforehand. In most cases, the cover or the central plate is screwed to the insert with a small, centrally located screw. You can simply loosen them and carefully pull off the cover.cleaningCentral plates, central discs, rocker switches and cover frames are often touched. We recommend regular cleaning. With a rinse cycle in the dishwasher, all parts become clean again.Some materials are sensitive to heat or water. For example, clean metal covers by hand. Please make sure that the cleaned parts are absolutely dry before you start the cultivation. Place the frame behind the cover and screw it to the insert.Is there a cover for buttons and switches for outdoor use?A special feature are the covers for outdoor use. This is due to the necessary protection against dust, dirt and water. The optimal switch range for use outdoors or in damp rooms is at least IP44 splash-proof. This should also have a reinforced frame, be made of robust material and be mountable to protect it against theft. As a rule, you do not receive such covers individually but in a set. TIP:Many outdoor covers are visually very appealing. These can also find a place in the interior design. Please do not use interior covers in damp rooms or outdoors. As a rule, these switch ranges do not offer the necessary protection.Do covers for switches and buttons break easily?Covers for switches and buttons are actuated several times a day, depending on where they are used. However, the loads on the material are low. The high-quality products from all major manufacturers have proven to be very robust in everyday use. With careful handling, the covers can last for several decades. During assembly and disassembly, there is a risk of damage if, for example, you overtighten the assembly screw. Benefit from our huge selection and the low prices for covers from Alre-it, Berker, Busch Jaeger, DEHN, Eaton, Elso, Eltako, Gira, Hager, Jung, Legrand Bticino, Legrand SEKO, Merten, OBO, Peha, Rademacher, Siemens , Somfy, Tehalit and Thebes. The products in our catalog are sorted by relevance. This makes it easier for you to find the right item for you.  Catalogue content:In this eibabo® catalogue Domestic switching devices > Control element/cover plate for domestic switching devices you will find items from the following product groups:Item overview:ActivityAntique brassBlank panelBlind switch toggleCentral diskControl surfacesDouble switchEmergency call systemExtensionFull plateHeating emergency switchLight emission windowManufactureMocha metallicNurse emergency callResidual currentRotary dimmerSensor insertShaver socketShutter buttonShutter controlSignal colourSurface frameTactile controlTemperature controllerTimersTitle blocksToggle switchfrom the following manufacturers:Manufacturer overview catalogue Cover switch-button-dimmer:Alre-itBerkerBusch JaegerDEHNEatonElsoEltakoGiraJungLegrand BticinoLegrand SEKOMertenPehaRademacherSiemensSomfyTehalitTheben
Close filters
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
from to

1 From 625
No results were found for the filter!
RECOMMENDED
3D
Busch Jaeger - 3015 EWN-53 - Socket - Socket outlet (receptacle) NEMA yellow 3015 EWN-53
3,058.21₹ excl. VAT

*

plus shipping
(6,847.86₹ RRP***)
Socket - Socket outlet (receptacle) NEMA yellow
Busch Jaeger
| 3015 EWN-53
RECOMMENDED
3D
RECOMMENDED
3D
Rutenbeck - UAE 8(8)Up 0 - Connection box UAE 8 (8)Up 0 - RJ45 8(8) Data outlet Cat.3 white UAE 8(8)Up 0
448.82₹ excl. VAT

*

plus shipping
(1,107.98₹ RRP***)
Connection box UAE 8 (8)Up 0 - RJ45 8(8) Data outlet Cat.3 white
Rutenbeck
| UAE 8(8)Up 0
RECOMMENDED
3D
Jung - UAE 8-8 UPOK6 - Data box 2-fold, Category 6 UAE 8-8 UPOK6
2,121.12₹ excl. VAT

*

plus shipping
(4,017.83₹ RRP***)
Data box 2-fold, Category 6
Jung
| UAE 8-8 UPOK6
RECOMMENDED
3D
Jung - A 1520-13 BF SEV WW - Socket alpine white Swiss standard - Socket outlet (receptacle) A 1520-13 BF SEV WW
2,439.43₹ excl. VAT

*

plus shipping
(4,622.52₹ RRP***)
Socket alpine white Swiss standard - Socket outlet (receptacle)
Jung
| A 1520-13 BF SEV WW
RECOMMENDED
3D
Astro Strobel - GUT 300 - Antenna socket 3-hole branch socket - Antenna end socket for antenna GUT 300
487.32₹ excl. VAT

*

plus shipping
(749.29₹ RRP***)
Antenna socket 3-hole branch socket - Antenna end socket for antenna
Astro Strobel
| GUT 300
RECOMMENDED
3D
Schneider Electric - KSB32CM55 - Tap-off box 35A,5TE - Tap off unit for busway trunk 32A KSB32CM55
5,931.44₹ excl. VAT

*

plus shipping
(10,516.40₹ RRP***)
Tap-off box 35A,5TE - Tap off unit for busway trunk 32A
Schneider Electric
| KSB32CM55
RECOMMENDED
3D
Berker - 941852502 - Schuko plug polar white with screw terminals - Socket outlet (receptacle) 941852502
340.84₹ excl. VAT

*

plus shipping
(638.50₹ RRP***)
Schuko plug polar white with screw terminals - Socket outlet (receptacle)
Berker
| 941852502
RECOMMENDED
3D
Siemens - 5UB1511 - Schuko socket Delta Plus, tws - Socket outlet (receptacle) white 5UB1511
341.78₹ excl. VAT

*

plus shipping
(583.10₹ RRP***)
Schuko socket Delta Plus, tws - Socket outlet (receptacle) white
Siemens
| 5UB1511
RECOMMENDED
3D
Busch Jaeger - 20 EUC-885 - Socket insert matt black - Socket outlet (receptacle) 20 EUC-885
863.85₹ excl. VAT

*

plus shipping
(1,673.23₹ RRP***)
Socket insert matt black - Socket outlet (receptacle)
Busch Jaeger
| 20 EUC-885
RECOMMENDED
3D
1 From 625