The following 1758 products have been found matching your search "Runpotec":

Item/s (1758)

Categories | Others (10)

Found in manufacturer pages: 1

Runpotec - Runpotec is an owner-managed company that deals with cable roll systems. It manufactures its products in Austria, in two in-house factories using modern production facilities. The range is divided into three segments, namely cable pulling systems, cable rolling systems and measuring and inspection devices. A short example: When building a house, empty pipes were laid as a precautionary measure in order to be able to subsequently install cables and services if necessary. But if you have to thread them through crooked parts of the building or over several floors, this can cause big problems. For this purpose there are cable pulling systems that greatly simplify the work. Runpotec develops such cable pullers in different lengths and for different pipe diameters. But the company's product range goes even further. It offers cable length measuring devices, cable drum dispensers, inspection and multifunction cameras, laser distance measuring devices and all kinds of accessories such as cable lubricants, cable grips, hooks and cable loops. We at the eibabo® technology store speak from experience. As a company that has been carrying out electrical installations and developing complex smart home systems for decades, we regularly have to resort to high-quality cable pull systems and cable unwinding devices. The products of the Runpotec brand impress with their easy handling and stable materials. These quality tools have proven themselves for us. We also receive only positive feedback from our customers and installation partners. In the eibabo® shops from eibmarkt® you get the entire product range at the best conditions. Use one of our many secure payment methods and look forward to very short delivery times, because Runpotec items are in stock. Shipping is available worldwide on request.

Found in shop categories: 9

Cable pulling device - Laying cables and lines can be very tedious, especially when they have to be routed through walls, empty pipes or around inaccessible corners. Cable pulling systems help here. But how do you use them? What should you pay attention to when buying? And which system is best suited to your circumstances. We answer frequently asked questions and give a small overview of the different systems on the market.Laying or replacing wiring is done in different ways and is subject to certain rules. Regardless of the choice of wiring and compliance with all safety regulations, the installation method depends primarily on local conditions. When a building is under construction, the electrical wiring is often laid at an early stage. As long as the walls and ceilings are still open or the floor construction has not yet been completed, the installation usually does not pose a challenge.Rules for layingElectrical lines are laid only horizontally, vertically and at right angles. Crossings are to be avoided. The distance to the floor and ceiling should be at least 15 cm, to doors and windows 10 cm and to other installations at least 3 cm.These rules will help you find hidden cables in the wall and plan new cable routes. However, it is not always possible to lay the lines during early construction stages. Then empty pipes are provided, in which later the cables have to be drawn. Even with renovation work, refurbishment or conversions, floors, ceilings and walls are usually already in place. Renewing the electrical installation is often more difficult in these cases because either pipes that are already in use are given additional lines or the routes have to be based on the premises. If you don't have professional equipment at hand, 'threading' the cables through walls and around corners quickly becomes a tedious test of patience. In some situations laying without tools is even impossible. Cable pulling systems make your work easier and speed up the completion of the installation.What are cable pulling systems?A cable laying device or cable puller is a special tool that is often required when laying cable systems for electricity, telephone or computer networks. It is a stiff yet flexible rod with special properties. Typically, the rod is wound on a drum but assumes a straight shape when unwound. The device is used to install a cable through hard-to-reach places. These include, for example:metal pipes and plastic pipesCable ducts and electrical boxesVoids under the roofing material or behind wall panelspassageways in concrete floorsand more In order to understand how a cable pulling system works, we must first look at its structure. So you want to run a cable and you are faced with the following situation: You want the cable to enter one point in an architectural structure and emerge from another point. The distance between the two points can be a few centimeters, but also several tens of meters. Along the way, the cable may have to negotiate elevation changes, bends, and other obstacles. Commonly, a power cable or data cable is for:either too stiff to pass the obstacles and bendsor too flexible to not twist or loop as it travels through the lumen It is therefore necessary to first guide a suitable tool through the route and then use it to pull the required cable through. This is where the flexible rod comes into play.This rod is also referred to as a pull-in wire. Various tools can be attached to its tip. In order to find the way, guide heads with different diameters can be mounted. These have the shape of balls and generate only a minimum of friction when 'threading'. This reduces the risk of snagging on irregularities inside the cavity or pipe. When you reach the other end of the route, swap out the guide head for a towing eye or cable sock. With these tools, the cable to be laid is fixed to the pull-in wire. If you now pull back the rod / the pulling-in wire, the power cable or the data cable is automatically pulled with it.Image: Runpotec 10088 Power Rex cable pulling deviceWhat material should the cable pulling rod be made of?In order to make it as easy as possible to guide the pull-in wire through a structure, it should have certain properties. On the one hand, it must be stable enough to always keep its direction. On the other hand, it must also be flexible enough to overcome all obstacles. The devices for pulling cables are therefore made of steel, fiberglass or nylon (polyamide).Steel pull-in wires are steel cables with a polyamide sheath. These do not stretch and can withstand heavy loads when pulling power lines in hard-to-reach areas. The main area of application is bridging larger distances in cable ducts. The disadvantage of the steel variants is the formation of loops if they have been wound on the drum for a long time.Fiberglass rods have increased rigidity and retain their straight shape even after being coiled for many years. As a result, their field of application is limited to straight routes with maximum gentle bends. Tight curves and high stresses lead to buckling, cracking or breaking of the material.Nylon rods are beneficial when maximum flexibility is required. In addition, this material is non-conductive, allowing installation in ducts with already live cables. These are used in narrow, small-diameter shafts, as their cross-section is often less than 5 mm.What should I consider when buying cable pull systems?In addition to choosing the right material for the draw-in wire, its length and diameter are of course an important selection criterion. Useful lengths start at 5 meters. However, here in the shop you can also get products with a length of several hundred meters. Please note that the pulling wire never runs straight through the route, but always makes certain waves. Therefore, always choose a length that is at least 20% longer than the actual length of the route. The diameter of the pull-in wire influences its flexibility on the one hand and its suitability for use in tight spaces on the other. Choose a compromise that suits you.Please pay attention to the way the pull-in wire is attached to the cable. There are several options here. Choose from connecting sleeves, clamps, pull loops or cable grips for the respective cable diameter. Ideally, the pull-in wire and the diameter of the connection point should be thinner than the cable. This avoids unnecessary snagging when pulling through bottlenecks. This is how you saveSome cable pulling systems offer different tools for fixing the cables as a set. So you are well equipped for all situations. Long cable pullers come with special spools that prevent snagging. In such cases, weight must also be taken into account. A trolley makes handling easier, especially when the device is in daily use.With these tips, you can quickly and easily pull cables through cable ducts, empty pipes, existing cable ducts and through molded bricks. Save time and lay the lines in no time thanks to this innovative technology. At eibabo®, we offer cable pulling devices with robust polyester pull-in straps, with pull-in wires made of glass fiber or steel cables. In addition to complete sets, our range also includes end sleeves, individual tapes and rods, ropes and wires as well as accessories and other spare parts. We offer you inexpensive and high-quality products from many well-known manufacturers such as Runpotec, HellermannTyton, Cimco, Klauke, Lapp and Bachmann.  Catalogue content:In this eibabo® catalogue Hand tools > Cable pulling system you will find items from the following product groups:Item overview:Brass sleeveCable management headCable pilotCable pullingCable pulling deviceCable pulling gunCable pulling toolCable stockingCable tapeFeed systemFeeding systemFiber optic cable pulling systemFiberglass replacement tapeFish tapeGuide sleeveLeadership spiralLeading headPlastic fish tapePlastic pullerPolyester tapePull-in aidReplacement fiberglass strapRetractable spiralSpare rollSpare stickSpiral pullerStart bulbStarting sleevefrom the following manufacturers:Manufacturer overview catalogue Cable pulling device:BachmannCimcoE+P ElektrikHellermann TytonKlaukeLappRunpotec
Cable grip - Do you know that too? As a precautionary measure, a large number of empty pipes are already installed when fitting out the interior because you already know that the electrical installation will have to be installed there later. But when the time comes, the required power cables cannot be pushed through the empty pipes because they are either squeezed somewhere or have been laid around very tight radii. This can quickly cost a lot of time and nerves. But here good advice does not have to be expensive. With the cable pulling systems from the eibabo online shop, threading the required power lines through existing empty conduits is greatly simplified. On the one hand you get high-quality cable pull-in systems made of fiberglass and on the other hand cable grips for the secure attachment of the cable to the pull-in system. These work in a similar way to a Chinese finger trap. A stainless steel or fiberglass mesh with an eyelet or hook is pushed over a cable end, contracts strongly when pulled and holds the cable in place. The higher the pull, the stronger the holding forces.Catalogue content:In this eibabo® catalogue Hand tools > Cable stocking you will find items from the following product groups:Item overview:Cable gripCable insertion systemCable lubricantCable lubricating greaseCable pull-in aidCable pullingCable pulling aidCable pulling deviceCable pulling specialistCable pulling toolCable retractionCable retraction springCable retraction systemCable stockingCable tapeCollection aidDevice for pulling in the cableDevices for pulling in cablesFeed systemFeeding systemFish tapeInstallationLubricantPull-in aidRetractable spiralRetraction toolStockingTool for pulling in the cablefrom the following manufacturers:Manufacturer overview catalogue Cable grip:CimcoHellermann TytonKlaukeRunpotec
Terminal box - You have to install circuits and connect cables and wires to each other at various points in the room, in the house or outdoors. These connections are usually implemented using Wago terminals, luster terminals or terminal strips. However, these terminals cannot remain unprotected and freely accessible. There are terminal boxes in various designs and sizes for this purpose. With some, the clamping rails are already pre-installed and you only have to assemble the cables and lines. You can use these indoors, for example, as sub-distributors to supply your garage with electricity. Others are empty and can therefore be used freely for your individual cable connections. Specially sealed polycarbonate housings with protection class IP68 are available for outdoor use. You can use it to create installations in the garden or on the terrace. In the eibabo online shop you can buy terminal boxes cheaply and conveniently. Take a look at our extensive range.Catalogue content:In this eibabo® catalogue Connection devices > Terminal box you will find items from the following product groups:Item overview:Box with lidCable boxCable branch/connection box equippedCable junction box for light poleConnection cabinetConnection cassetteConvector barCorner cabinetData network enclosureDistributorDistributor caseDistributor for fire alarm systemElectric heatingEx junction boxEx terminal boxExplosion-proof junction boxExplosion-proof terminal boxHeating panelHeating tape connectionHygiene cabinetJunction boxLarge closetSecurity boxSmall caseSmall distribution board equippedTerminal boxWall convectorWet room junction boxfrom the following manufacturers:Manufacturer overview catalogue Terminal box:Alre-itCeagDätwyler IT Infra.EthermaHagerHenselHäwaIfm ElectronicKleinhuisnVent ThermalOBOPollmannPROTEC.classRittalRunpotecSchaltbauSchneider ElectricSpelsbergStahl
Accessories cable pulling system - Have you ever tried to lay cables and lines through existing empty pipes, wall openings or other cavities? It's a task that can be extremely nerve-wracking if you don't have the cable-pulling equipment you need. While threading is often still easy, determining the right direction, especially when it comes to corners and bends, quickly becomes a test of your own patience. Or the cable gets stuck with its tip and therefore cannot be pushed through to the end of the pipe. In order to save you these problems, the eibabo online shop offers you extensive, practical and easy-to-use accessories for pulling cables. Pull wires, gliders, pull loops, connecting sleeves or rollers are just a few items from our range for cable pull systems. Take a look around, you will surely find a suitable tool and save yourself the time-consuming fumbling in the future.Catalogue content:In this eibabo® catalogue Hand tools > Accessories for cable pulling system you will find items from the following product groups:Item overview:Accessories for cable pulling systemAccessories/spare parts for cable pulling systemAccessory for cable pulling systemCable insertion systemCable pulling accessoriesCable pulling deviceCable pulling sleeveCable pulling specialistCable pulling toolCable retraction systemCable stockingConnectorCoupling pieceDevice for pulling in the cableEyeFish tapeGuide bushingGuide sleevePull-in aidReplacement footSpare bandSpare parts for cable pulling systemSpiral pullerStainless steel pull loopStainless steel sleeveStart bulbSteel reelTool for pulling in the cablefrom the following manufacturers:Manufacturer overview catalogue Accessories cable pulling system:BachmannCimcoHellermann TytonKlaukeLübberingRunpotecSchill
Close filters
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
from to

1 From 147
No results were found for the filter!
RECOMMENDED
3D
RECOMMENDED
3D
Runpotec - 10014 - Cable entry system, Runpo 5, 30m, with box, 5,3mm 10014
14,578.75₹ excl. VAT

*

Cable entry system, Runpo 5, 30m, with box, 5,3mm
Runpotec
| 10014
RECOMMENDED
3D
RECOMMENDED
3D
Runpotec - 30030 - Cable pulling system Power Spiral KST 20m 30030
2,321.99₹ excl. VAT

*

Cable pulling system Power Spiral KST 20m
Runpotec
| 30030
RECOMMENDED
3D
Runpotec - 30021 - Power Spiral MET 30m - Cable pulling system 30m 30021
5,039.57₹ excl. VAT

*

Power Spiral MET 30m - Cable pulling system 30m
Runpotec
| 30021
RECOMMENDED
3D
Runpotec - 30018 - Power Spiral MET 15m - Cable pulling system 15m 30018
3,066.30₹ excl. VAT

*

Power Spiral MET 15m - Cable pulling system 15m
Runpotec
| 30018
RECOMMENDED
3D
Runpotec - 30017 - Power Spiral MET 10m - Cable pulling system 10m 30017
2,347.30₹ excl. VAT

*

Power Spiral MET 10m - Cable pulling system 10m
Runpotec
| 30017
RECOMMENDED
3D
Runpotec - 20238 - RunpoGlider 7 - Accessory for tool 20238
2,609.78₹ excl. VAT

*

RunpoGlider 7 - Accessory for tool
Runpotec
| 20238
RECOMMENDED
3D
RECOMMENDED
3D
1 From 147