Shutdown module 400V, up to 25A - Motor starter combination 3RK1304-0HS00-8AA0

Siemens - 3RK1304-0HS00-8AA0 - Shutdown module 400V, up to 25A - Motor starter combination 3RK1304-0HS00-8AA0
Photo source: fig. possibly similar
Photo source: fig. possibly similar
3RK1304-0HS00-8AA0 4011209659971 EAN/GTIN DE 23691322 WEEE

36,788.09₹ excl. VAT

16-17 days* (IND)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Shutdown module 400V, up to 25A 3RK1304-0HS00-8AA0 Type of motor starter other, rated control... more
Shutdown module 400V, up to 25A - Motor starter combination 3RK1304-0HS00-8AA0 – Siemens – 4011209659971: Shutdown module 400V, up to 25A 3RK1304-0HS00-8AA0 Type of motor starter other, rated control supply voltage Us at AC 50 Hz 400 ... 400V, rated control supply voltage Us at AC 60 Hz 0V, rated control supply voltage Us at DC 20.4 ... 28.8V, type of voltage for actuation DC, rated operational current Ie 25A, rated operational current at AC-3, 400 V 25A, overload release current setting 25 ... 25A, connection type main circuit flat plug connection, type of coordination according to IEC 60947-4-3 class 1, degree of protection (IP) IP65, width 110mm, Height 230mm, depth 150mm, ET 200pro ASm 400 V shutdown module 400 V up to 25 A for safe shutdown up to category 3/4 Han Q4/2 motor starter SIMATIC ET 200pro for operational switching of three-phase motors in the field, with short-circuit and overload protection and for complete TIA integrated, highly automated applications, eg in conveyor technology. The multifunctional motor starters are fully integrated in the ET 200pro I/O system. The quick and extensive configuration takes place in the TIA Portal. Use without a control cabinet thanks to the high degree of protection IP65/67. Consistent communication via PROFIBUS and PROFINET. The wide adjustment range reduces the cost of warehousing and project planning when there is little device variance. The simple installation thanks to the wiring bus and plug-in technology enables the motor starter to be replaced quickly and increases system availability. The Motor Starter ES software is available for configuration, commissioning, operation and diagnostics. PROFIenergy supports active and efficient energy management. The devices are approved worldwide (e.g. IEC, CCC and UL/CSA) and IE3/IE4ready. Available as direct or reversing starters with different motor current ranges, as a standard or high-feature variant (incl. soft start function). Optionally, a Repair switch module can be used to ensure safe separation for all downstream motor starters during repair work. In addition, there is a fail-safe repair switch and a shutdown module for fail-safe applications. Motor starter ET 200pro - compact and intelligent.
... more
Type of motor starter other
With short-circuit release no
Voltage type for actuation DC
Rated operational current Ie 25 A
Rated operating current at AC-3, 400 V 25 A
Overload release Current setting 25 A
Connection type main circuit Blade terminal
With transformer no
Assignment type according to IEC 60947-4-3 Class 1
IP protection) IP65
Supports protocol for ASI no
Width 110 mm
Height 230 mm
Depth 150 mm

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Shutdown module 400V, up to 25A - Motor starter combination 3RK1304-0HS00-8AA0"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.