Installation switch

Do you still need suitable switches to switch your lighting circuits? These should be of high quality, cheap and usable for different requirements? Then you've come to the right place in this eibabo® catalogue. We light up the darkness. Here you will find information about the different switch types, the areas of application and their special features with regard to the installation.

What are installation switches?

In electrical engineering, an installation switch is a component that disconnects or connects a circuit as part of a switching process or diverts it from one electrical conductor to another. An installation switch is typically constructed electromechanically and consists of one or more movable, current-conducting contact pairs. If a contact pair touches, the current can flow. If the contacts are separated, no current flows. The devices are differentiated according to their technical design, their switching type and their operation.

 


Connection of the electrical conductors:

Here in the shop you will find high-quality switches with screw connection terminals or plug-in terminals as well as installation switches for rigid or flexible electrical conductors.


 

Types of switching are, for example, off switches and changeover switches, series switches, cross switches, multiple switches or group switches. If you look at the operation, then there are, for example, rocker switches, toggle switches, rotary switches, step switches, pushbutton switches, pull switches and switches that work with radio or cards.

Where are installation switches used?

In the low-voltage network, installation switches are mainly used to switch lighting circuits. The installation switches are available either as variants for surface-mounted installation, duct installation, switch panel installation or flush-mounted installation. For flush-mounted variants, there are suitable switch boxes for solid walls and lightweight walls.

Which installation switch should I buy?

Choosing the right installation switch depends on various factors. These include:

  • What should be switched (light, blinds and so on)?
  • How should the circuit be set up? Which switching conditions are desired?
  • How should the switch be operated (remote control, time switch and so on)?
  • Is the switch exposed to special conditions (humidity, temperature fluctuations)?
  • and some more

 

Below we give you a brief overview of the various switches and circuits. This should help you to be able to select the best switch for your application.

How do the individual circuit types differ?

At eibabo® we carry installation switches from the switch ranges of all well-known manufacturers. The installation switches are mostly offered as hand-operated switches for a fixed installation. Many technical differences lead to numerous possible applications and a wide selection. Using the example of switching lighting circuits, we distinguish:

ON/OFF switch

This is the simplest of the switching types mentioned. Here, a lighting circuit is opened or closed via a switch. They switch one lamp or several lamps connected in series.

toggle switch

The toggle switch works similar to the ON/OFF switch. The difference is that you can switch the light from two switching points. Each changeover switch has three terminals and the two switching points are connected to one another by two conductors. With each of the two switches you can connect to one or the other line. The opening or closing of the circuit thus takes place independently of the other changeover switch. Depending on the switch position, the current either flows through one of the two conductors or not at all. This type of switch is used, for example, in long corridors or between two floors.

security at night

Many installation switches can be selected with or without a glow control lamp. Variants with orientation light or switch lighting are often possible.


cross switch

The cross switch can be seen as an extension of the toggle switch. With the cross switch you can switch the light from more than two switching points. A cross switch is therefore equipped with four connections. In principle, the number of possible cross switches in the lighting circuit is not limited, but the wiring becomes more complex with each switch. As soon as more than three or four switching points are desired, the circuit is better made with a latching switch and buttons.

series switch

A series switch consists of more than just a rocker switch. With such double switches or multiple switches, you can switch the corresponding number of lighting circuits separately via one control element (e.g. the ceiling lighting and the ambient lighting in the living room).

group switch

The group switch works similar to the series switch. This also switches more than one circuit - but according to the either-or principle. In other words, either one lamp or the other lamp lights up. Both circuits can therefore never be switched on at the same time.

Installation switch with special equipment

Special versions of switches are suitable for all requirements that you place on your project or want to implement. At eibabo® you can choose from a large selection of high-quality installation switches for different purposes:

  • Button for the installation remote control
  • electronic switches
  • remote control switches
  • Switches in combination with dimmers and time switches
  • and so forth

 

Source: eibabo®, Jung 507 U cross rocker switchImage: Jung 507 U cross rocker switch

What do the symbols on the installation switches mean?

If you look at the front and back of installation switches, you will notice a number of symbols. Some are used to display the current switching status, others provide information on correct installation. Often encountered are:

  • ~ - the wavy line (tilde) represents alternating current
  • N - the capital N denotes the neutral conductor
  • L - the capital L stands for the outer conductor
  • 0 / O - the zero / the big O describe the off position
  • 1 / I - the one / the capital I symbolize the on position / ON position
  • ↑ / ↓ - Arrows in the direction of the connector represent inputs, opposite arrows are outputs
  • K - stands for a 'corresponding' connection (to another toggle switch)
  • NF - is the abbreviation for low frequency

 

Depending on the manufacturer, the circuit diagram of the device as well as safety instructions such as the GS symbol or the ÖVE symbol can be shown on the back.

What type of protection should I choose for my installation switch?

The area of application of an installation switch is also determined by its IP protection class (ingress protection). This indicates how well the device is protected from foreign objects and moisture. Most indoor switches do not have a particularly high level of protection. You will often find the designation 'IP20' on the device. If you are looking for an installation switch for damp rooms or outdoors, please make sure that the device is suitable for the respective location. You can usually find this information in the product description.

 

eibabo - technology store

 

Catalogue content:


In this eibabo® catalogue Domestic switching devices > Switch you will find items from the following product groups:

Item overview:

  • Blind control
  • Ceiling fan
  • Central plate
  • Closer
  • Control switch
  • Design cover
  • Electrical installation
  • Energy saving switch
  • Heating control
  • Heating emergency switch
  • Key switch
  • Nostalgia switch
  • Radio fan
  • Removable fan
  • Reversing switch
  • Rocker control switch
  • Rocker switch
  • Shift knob
  • Shutter button
  • Shutter switch
  • Switch
  • Switch control switch
  • Switch insert
  • Switch range
  • Thermostat
  • Title block
  • Twilight switch
  • Ventilation unit


from the following manufacturers:

Manufacturer overview catalogue Installation switch:

  • BEGA Gantenbrink
  • Berker
  • Busch Jaeger
  • Elso
  • Gira
  • Hager
  • Helios
  • HHG
  • Huber + Söhne WHD
  • Jung
  • Legrand Bticino
  • Legrand SEKO
  • Maico
  • Merten
  • OBO
  • Peha
  • Schabus
  • Schneider Electric
  • Siemens


 
Do you still need suitable switches to switch your lighting circuits? These should be of high quality, cheap and usable for different requirements? Then you've come to the right place in this... read more »
Close window
Installation switch – switch lighting circuits individually

Do you still need suitable switches to switch your lighting circuits? These should be of high quality, cheap and usable for different requirements? Then you've come to the right place in this eibabo® catalogue. We light up the darkness. Here you will find information about the different switch types, the areas of application and their special features with regard to the installation.

What are installation switches?

In electrical engineering, an installation switch is a component that disconnects or connects a circuit as part of a switching process or diverts it from one electrical conductor to another. An installation switch is typically constructed electromechanically and consists of one or more movable, current-conducting contact pairs. If a contact pair touches, the current can flow. If the contacts are separated, no current flows. The devices are differentiated according to their technical design, their switching type and their operation.

 


Connection of the electrical conductors:

Here in the shop you will find high-quality switches with screw connection terminals or plug-in terminals as well as installation switches for rigid or flexible electrical conductors.


 

Types of switching are, for example, off switches and changeover switches, series switches, cross switches, multiple switches or group switches. If you look at the operation, then there are, for example, rocker switches, toggle switches, rotary switches, step switches, pushbutton switches, pull switches and switches that work with radio or cards.

Where are installation switches used?

In the low-voltage network, installation switches are mainly used to switch lighting circuits. The installation switches are available either as variants for surface-mounted installation, duct installation, switch panel installation or flush-mounted installation. For flush-mounted variants, there are suitable switch boxes for solid walls and lightweight walls.

Which installation switch should I buy?

Choosing the right installation switch depends on various factors. These include:

  • What should be switched (light, blinds and so on)?
  • How should the circuit be set up? Which switching conditions are desired?
  • How should the switch be operated (remote control, time switch and so on)?
  • Is the switch exposed to special conditions (humidity, temperature fluctuations)?
  • and some more

 

Below we give you a brief overview of the various switches and circuits. This should help you to be able to select the best switch for your application.

How do the individual circuit types differ?

At eibabo® we carry installation switches from the switch ranges of all well-known manufacturers. The installation switches are mostly offered as hand-operated switches for a fixed installation. Many technical differences lead to numerous possible applications and a wide selection. Using the example of switching lighting circuits, we distinguish:

ON/OFF switch

This is the simplest of the switching types mentioned. Here, a lighting circuit is opened or closed via a switch. They switch one lamp or several lamps connected in series.

toggle switch

The toggle switch works similar to the ON/OFF switch. The difference is that you can switch the light from two switching points. Each changeover switch has three terminals and the two switching points are connected to one another by two conductors. With each of the two switches you can connect to one or the other line. The opening or closing of the circuit thus takes place independently of the other changeover switch. Depending on the switch position, the current either flows through one of the two conductors or not at all. This type of switch is used, for example, in long corridors or between two floors.

security at night

Many installation switches can be selected with or without a glow control lamp. Variants with orientation light or switch lighting are often possible.


cross switch

The cross switch can be seen as an extension of the toggle switch. With the cross switch you can switch the light from more than two switching points. A cross switch is therefore equipped with four connections. In principle, the number of possible cross switches in the lighting circuit is not limited, but the wiring becomes more complex with each switch. As soon as more than three or four switching points are desired, the circuit is better made with a latching switch and buttons.

series switch

A series switch consists of more than just a rocker switch. With such double switches or multiple switches, you can switch the corresponding number of lighting circuits separately via one control element (e.g. the ceiling lighting and the ambient lighting in the living room).

group switch

The group switch works similar to the series switch. This also switches more than one circuit - but according to the either-or principle. In other words, either one lamp or the other lamp lights up. Both circuits can therefore never be switched on at the same time.

Installation switch with special equipment

Special versions of switches are suitable for all requirements that you place on your project or want to implement. At eibabo® you can choose from a large selection of high-quality installation switches for different purposes:

  • Button for the installation remote control
  • electronic switches
  • remote control switches
  • Switches in combination with dimmers and time switches
  • and so forth

 

Source: eibabo®, Jung 507 U cross rocker switchImage: Jung 507 U cross rocker switch

What do the symbols on the installation switches mean?

If you look at the front and back of installation switches, you will notice a number of symbols. Some are used to display the current switching status, others provide information on correct installation. Often encountered are:

  • ~ - the wavy line (tilde) represents alternating current
  • N - the capital N denotes the neutral conductor
  • L - the capital L stands for the outer conductor
  • 0 / O - the zero / the big O describe the off position
  • 1 / I - the one / the capital I symbolize the on position / ON position
  • ↑ / ↓ - Arrows in the direction of the connector represent inputs, opposite arrows are outputs
  • K - stands for a 'corresponding' connection (to another toggle switch)
  • NF - is the abbreviation for low frequency

 

Depending on the manufacturer, the circuit diagram of the device as well as safety instructions such as the GS symbol or the ÖVE symbol can be shown on the back.

What type of protection should I choose for my installation switch?

The area of application of an installation switch is also determined by its IP protection class (ingress protection). This indicates how well the device is protected from foreign objects and moisture. Most indoor switches do not have a particularly high level of protection. You will often find the designation 'IP20' on the device. If you are looking for an installation switch for damp rooms or outdoors, please make sure that the device is suitable for the respective location. You can usually find this information in the product description.

 

eibabo - technology store

 

Catalogue content:


In this eibabo® catalogue Domestic switching devices > Switch you will find items from the following product groups:

Item overview:

  • Blind control
  • Ceiling fan
  • Central plate
  • Closer
  • Control switch
  • Design cover
  • Electrical installation
  • Energy saving switch
  • Heating control
  • Heating emergency switch
  • Key switch
  • Nostalgia switch
  • Radio fan
  • Removable fan
  • Reversing switch
  • Rocker control switch
  • Rocker switch
  • Shift knob
  • Shutter button
  • Shutter switch
  • Switch
  • Switch control switch
  • Switch insert
  • Switch range
  • Thermostat
  • Title block
  • Twilight switch
  • Ventilation unit


from the following manufacturers:

Manufacturer overview catalogue Installation switch:

  • BEGA Gantenbrink
  • Berker
  • Busch Jaeger
  • Elso
  • Gira
  • Hager
  • Helios
  • HHG
  • Huber + Söhne WHD
  • Jung
  • Legrand Bticino
  • Legrand SEKO
  • Maico
  • Merten
  • OBO
  • Peha
  • Schabus
  • Schneider Electric
  • Siemens
Close filters
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
from to

52 From 80
No results were found for the filter!
RECOMMENDED
Gira - 013646 - Tactile control switch bl S-Color - 3-way switch (alternating switch) 013646
1,989.20₹ excl. VAT

*

plus shipping
(3,429.08₹ RRP***)
Tactile control switch bl S-Color - 3-way switch (alternating switch)
Gira
| 013646
RECOMMENDED
Jung - 606 W EINS - Mission - Two-way switch flush mounted grey 606 W EINS
514.64₹ excl. VAT

*

plus shipping
(1,008.66₹ RRP***)
Mission - Two-way switch flush mounted grey
Jung
| 606 W EINS
RECOMMENDED
Jung - 602 KOA WW - Rocker control switch Off 2-pin. - 2-pole switch surface mounted white 602 KOA WW
2,176.69₹ excl. VAT

*

plus shipping
(3,868.73₹ RRP***)
Rocker control switch Off 2-pin. - 2-pole switch surface mounted white
Jung
| 602 KOA WW
RECOMMENDED
Berker - 936522509 - Rocker switch polar white with imprint O - 2-pole switch built-in white 936522509
1,115.53₹ excl. VAT

*

plus shipping
(2,090.45₹ RRP***)
Rocker switch polar white with imprint O - 2-pole switch built-in white
Berker
| 936522509
RECOMMENDED
Gira - 283001 - Rocker switch on off 3x cws - Off switch 3x1-pole flush mounted 283001
1,307.70₹ excl. VAT

*

plus shipping
(2,255.43₹ RRP***)
Rocker switch on off 3x cws - Off switch 3x1-pole flush mounted
Gira
| 283001
RECOMMENDED
Peha - H 626 - Rocker switch ws 10A 250V Univ.Sch. - 3-way switch (alternating switch) H 626
687.13₹ excl. VAT

*

plus shipping
(1,232.71₹ RRP***)
Rocker switch ws 10A 250V Univ.Sch. - 3-way switch (alternating switch)
Peha
| H 626
RECOMMENDED
RECOMMENDED
Jung - 605 A - Rocker switch series - Series switch surface mounted 605 A
1,087.41₹ excl. VAT

*

plus shipping
(1,932.02₹ RRP***)
Rocker switch series - Series switch surface mounted
Jung
| 605 A
RECOMMENDED
Elso - 211664 - Double changeover switch rw with rocker - Alternating-/alternating switch (2x 211664
1,800.78₹ excl. VAT

*

plus shipping
(3,126.29₹ RRP***)
Double changeover switch rw with rocker - Alternating-/alternating switch (2x
Elso
| 211664
RECOMMENDED
Berker - 937622531 - Control rocker switch br/ma 12V rt lens - 2-pole switch built-in brown 937622531
2,591.03₹ excl. VAT

*

plus shipping
(4,855.83₹ RRP***)
Control rocker switch br/ma 12V rt lens - 2-pole switch built-in brown
Berker
| 937622531
RECOMMENDED
Berker - 936522507 - Rocker switch green with imprint O - 2-pole switch built-in grey 936522507
1,115.53₹ excl. VAT

*

plus shipping
(2,090.45₹ RRP***)
Rocker switch green with imprint O - 2-pole switch built-in grey
Berker
| 936522507
RECOMMENDED
Legrand Bticino - 086004 - Surface-mounted cross switch Oteo 086004
1,198.02₹ excl. VAT

*

Surface-mounted cross switch Oteo
Legrand Bticino
| 086004
52 From 80
Viewed from you