Flat angle UT inside/outside - Underfloor duct flush open 250mm BKB2508551

Tehalit - BKB2508551 - Flat angle UT inside/outside - Underfloor duct flush open 250mm BKB2508551
Photo source: fig. possibly similar
Photo source: fig. possibly similar
BKB2508551 4012740846691 EAN/GTIN DE 23692311 WEEE

Our best price
12,945.41₹ excl. VAT
15,410.75₹ (-16% RRP***)

16-17 days* (IND)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Flat angle UT inside/outside BKB2508551 width 250mm, length 450mm, min. screed height 85mm,... more
Flat angle UT inside/outside - Underfloor duct flush open 250mm BKB2508551 – Tehalit – 4012740846691: Flat angle UT inside/outside BKB2508551 width 250mm, length 450mm, min. screed height 85mm, installation opening without, dry floor care, floor pan, flat angle lower part made of sheet steel for wall trunking floor BKB 250x85mm. Direction-changing molding (flat angle for inside and outside corners) for rooms with dry-cleaned floors. The 450 x 450 mm molded part consists of a floor pan and 1 piece of 450 x 450 mm assembly cover. The upper part with the floor pan is grounded using attached earth lugs. The molded part is to be installed horizontally on the unfinished floor and aligned to the screed height using leveling screws, adjustment range min. 96 mm max. 210 mm. The installation must be carried out before the screed is laid.
... more
Width 250 mm
Length 450 mm
Minimum screed height 85 mm
Leveling 96..254 mm
Lid fastening latching no
Mounting hole without
With partition yes
Max. Number of moves 2
Bulkhead mounting other
Floor care dry
Floor pan yes
Material of side wall / floor pan Steel
Surface side wall / floor pan galvanized

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Flat angle UT inside/outside - Underfloor duct flush open 250mm BKB2508551"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.