3-phase power measurement terminal - Fieldbus function-/technology module 750-493/000-001

WAGO - 750-493/000-001 - 3-phase power measurement terminal - Fieldbus function-/technology module 750-493/000-001
Photo source: fig. possibly similar
Photo source: fig. possibly similar
750-493/000-001 4055143374422 EAN/GTIN DE 40917098 WEEE

Our best price
28,505.99₹ excl. VAT

16-17 days* (IND)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Power measurement terminal 3-phase 750-493/000-001 supply voltage at AC 50 Hz 277... 277V, supply... more
3-phase power measurement terminal - Fieldbus function-/technology module 750-493/000-001 – WAGO – 4055143374422: Power measurement terminal 3-phase 750-493/000-001 supply voltage at AC 50 Hz 277... 277V, supply voltage at AC 60 Hz 277... 277V, supply voltage at DC 277... 277V, type of supply voltage AC/DC, number of HW interfaces Industrial Ethernet 0, number of PROFINET interfaces 0, number of HW interfaces serial RS-232 0, number of HW interfaces serial RS-422 0, number of HW interfaces serial RS-485 0, number of HW -Interfaces serial TTY 0, number of HW interfaces parallel 0, number of HW interfaces wireless 0, number of HW interfaces USB 0, number of HW interfaces other 0, supports protocol for other bus systems, system components, protection class (IP) IP20, fieldbus connection possible via separate bus coupler, DIN rail mounting possible, explosion protection category for gas without, explosion protection category for dust without, width 12mm, height 64mm, depth 100mm, the 3-phase power measurement terminal enables the measurement of d he electrical data of a three-phase supply network. The voltage is measured via the mains connection at the terminal points L1, L2, L3 and N. The current of the three phases is fed in via current transformers at the terminal points IL1, IL2, IL3 and IN. The pre-processing of the 3-phase power measurement terminal provides effective values in the process image without requiring high computing power on the controller. The 3-phase power measurement module calculates the active power (P) and the energy consumption (W) for each phase from the effective values for voltages (U) and currents (I). From these values z. B. the apparent power (S) and the phase shift angle (f) can be easily derived. The 3-phase power measurement terminal enables you to carry out a comprehensive network analysis via the fieldbus. Based on the values for voltage, current, effective and apparent power consumption as well as the load status, the system operator is able to optimally control the supply of a drive or a machine and protect the system from damage and failures.
... more
Supply voltage at DC 5 V
Voltage type of the supply voltage DC
Entrance, electricity yes
Input, voltage yes
Entrance, resistance no
Entrance, resistance thermometer no
Input, thermocouple no
Input signal configurable no
Resolution of the analog inputs 16 bits
Output, electricity no
Output, voltage no
Output signal configurable no
Number of analog inputs 6
Analog inputs configurable no
Analog outputs configurable no
Supports protocol for TCP / IP no
Supports protocol for PROFIBUS no
Supports protocol for CAN no
Supports protocol for INTERBUS no
Supports protocol for ASI no
Supports protocol for KNX no
Supports protocol for MODBUS no
Supports data highway protocol no
Supports protocol for DeviceNet no
Supports protocol for SUCONET no
Supports protocol for LON no
Supports protocol for PROFINET IO no
Supports protocol for PROFINET CBA no
Supports protocol for SERCOS no
Supports protocol for EtherNet / IP no
Supports protocol for DeviceNet Safety no
Supports protocol for INTERBUS safety no
Supports protocol for PROFIsafe no
Supports protocol for SafetyBUS p no
Supports protocol for other bus systems yes
Wireless standard Bluetooth no
Wireless standard WLAN 802.11 no
Radio standard GPRS no
Radio standard GSM no
Radio standard UMTS no
IO-Link master no
System component yes
IP protection) IP20
Rail mounting possible yes
Wall / direct mounting possible no
Front installation possible no
Rack mounting possible no
Suitable for safety functions no
Associated equipment (Ex ia) no
Associated equipment (Ex ib) no
Width 12 mm
Height 100 mm
Depth 67.8 mm

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "3-phase power measurement terminal - Fieldbus function-/technology module 750-493/000-001"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.