KNX module - KNX fieldbus function-/technology module 753-646

753-646 4045454778033 EAN/GTIN DE 40917098 WEEE

Our best price
30,516.76₹ excl. VAT

16-17 days* (IND)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
KNX/EIB module 753-646 Number of HW interfaces Industrial Ethernet 0 Number of interfaces... more
KNX module - KNX fieldbus function-/technology module 753-646 – WAGO – 4045454778033: KNX/EIB module 753-646 Number of HW interfaces Industrial Ethernet 0 Number of interfaces PROFINET 0 Number of HW interfaces serial RS-232 0 Number of HW interfaces serial RS-422 0 Number of HW interfaces serial RS-485 0, number of HW interfaces serial TTY 0, number of HW interfaces parallel 0, number of HW interfaces wireless 0, number of HW interfaces USB 0, number of HW interfaces other 0, supports protocol for KNX, supports protocol for other bus systems, system components, degree of protection (IP) IP20, fieldbus connection via separate bus coupler possible, DIN rail mounting possible, explosion protection category for gas without, explosion protection category for dust without, width 12mm, height 64mm, depth 100mm, the KNX /EIB/TP1 bus terminal is used to connect to a KNX/EIB/TP1 network. The terminal supports two different functions: Device mode: The terminal enables the connection of the programmable controller (*1) relevant for building automation to a KNX/TP1 network. In a KNX network, the terminal appears as a standard KNX device and is integrated via the ETS3/4 Professional commissioning tool. The terminal supports a maximum of 253 communication objects with any DPTs, 254 group addresses and 254 associations. The assignment of data from the application program to group addresses is carried out via an ETS3/4 plug-in. Router mode: In combination with the KNX IP controller and the first inserted KNX/EIB/TP1 module, the device becomes a KNXnet/IP router. The changeover of the terminal to router mode takes place automatically. An application program is not required for operation in router mode. Other terminals lined up on the KNX IP controller are addressed by the application in device mode. An external KNX power supply and the ETS3/4 Professional are required to operate the KNX/EIB/TP1 bus terminal.
... more
Supply voltage at DC 5 V
Voltage type of the supply voltage DC
Number of functions 1
With optical interface no
Supports protocol for TCP / IP no
Supports protocol for PROFIBUS no
Supports protocol for CAN no
Supports protocol for INTERBUS no
Supports protocol for ASI no
Supports protocol for KNX yes
Supports protocol for MODBUS no
Supports data highway protocol no
Supports protocol for DeviceNet no
Supports protocol for SUCONET no
Supports protocol for LON no
Supports protocol for PROFINET IO no
Supports protocol for PROFINET CBA no
Supports protocol for SERCOS no
Supports protocol for EtherNet / IP no
Supports protocol for DeviceNet Safety no
Supports protocol for INTERBUS safety no
Supports protocol for PROFIsafe no
Supports protocol for SafetyBUS p no
Supports protocol for other bus systems yes
Wireless standard Bluetooth no
Wireless standard WLAN 802.11 no
Radio standard GPRS no
Radio standard GSM no
Radio standard UMTS no
IO-Link master no
System component yes
Suitable for counting no
Suitable for weighing no
Suitable for temperature control no
Suitable for welding control no
Suitable for pressure control no
Suitable for NC no
Suitable for position detection no
Suitable for CNC no
Suitable for SSI no
Suitable for incremental value acquisition no
Suitable for absolute value acquisition no
Suitable for flow control no
Suitable for flow measurement no
Suitable for railway control no
Suitable for cam control no
Suitable for flying saw no
Suitable for multi-axis control no
Suitable for single-axis control no
Suitable for multi-axis positioning no
Suitable for single-axis positioning no
Function block restart interlock no
Function block automatic reset no
Contactor control function block no
Function block EMERGENCY STOP no
Function block acknowledgment button no
Function block two-hand circuit no
Function block operating mode selection no
Function block access control no
IP protection) IP20
Frequency measurement no
Rail mounting possible yes
Wall / direct mounting possible no
Front installation possible no
Rack mounting possible no
Suitable for safety functions no
Associated equipment (Ex ia) no
Associated equipment (Ex ib) no
Explosion protection category for gas without
Explosion protection category for dust without
Width 12 mm
Height 100 mm
Depth 69 mm

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "KNX module - KNX fieldbus function-/technology module 753-646"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.