Overvoltage protection 12VDC/450mA - Surge protection for signal systems VSPC 1CL 12VDC R

Weidmüller - VSPC 1CL 12VDC R - Overvoltage protection 12VDC/450mA - Surge protection for signal systems VSPC 1CL 12VDC R
Photo source: fig. possibly similar
VSPC 1CL 12VDC R 8951540000 4032248742783 EAN/GTIN DE 73937473 WEEE

8,394.59₹ excl. VAT
12,917.64₹ (-35.01% RRP***)

16-17 days* (IND)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Overvoltage protection 12VDC/450mA VSPC 1CL 12VDC R Rated voltage DC 12... 12V, maximum... more
Overvoltage protection 12VDC/450mA - Surge protection for signal systems VSPC 1CL 12VDC R – Weidmüller – 8951540000 – 4032248742783: Overvoltage protection 12VDC/450mA VSPC 1CL 12VDC R Rated voltage DC 12... 12V, maximum continuous voltage DC 15V, rated discharge current (8/20) 2.5kA, rated load current 0.45A, protection level wire/wire 25V, protection level wire/earth 450V, protection level wire /Signalground 450V, protection level Signalground/Protectiveground 650V, frequency 1.7... 1.7MHz, type of installation on base element, connection 1 other, arrester monitoring, optical signaling on the device, explosion-tested version, VARITECTOR SPC with pluggable arrester, which makes it easy to replace and easy testing possible without loosening the wiring. Maintenance intervals are easily made possible with the V-TEST test device. Furthermore, the easy-to-snap-on base socket - which at the same time establishes a PE contact via the DIN rail - offers a convenient assembly process. The VSPC offers easy handling combined with high packing density for high quality surge protection for all MSR signals. Colored voltage markings enable maintenance personnel to quickly identify them in the control cabinet. Furthermore, this product range offers a wealth of accessories, such as V-GROUND for grounding all sensor signals or the V-TEST connector for measurements in circuits. The overall height of the base element with plugged-in arrester is 69 mm, for the protection of analog signals / current loops, e.g.: Signals from current loops (analog measurements from sensors over long distances) 4...20 mA, 0...20 mA etc., , three- and four-wire without common reference potential, e.g.
... more
Rated voltage DC 12V
Highest continuous voltage DC 15 V
Nominal discharge current (8/20) 2.5 kA
Nominal load current 450 A
Protection level wire / core 25 V
Protection level core / earth 450V
Protection level wire / signal ground 450V
Protection level Signalground / Protectiveground 650V
Frequency 1.7 MHz
Mounting on base element
Connection 1 other
SPD yes
With telecommunication contact no
Signaling on the device optical
Explosion-tested version yes
Overall width 17.8 mm
IP protection) IP20

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Overvoltage protection 12VDC/450mA - Surge protection for signal systems VSPC 1CL 12VDC R"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.