Chain drive Synchro 1A/400mm/Black - Window opener 2000N max. opening 400mm WMX 814-2B0400S E1

WindowMaster - WMX 814-2B0400S E1 - Chain drive Synchro 1A/400mm/Black - Window opener 2000N max. opening 400mm WMX 814-2B0400S E1
Photo source: fig. possibly similar
WMX 814-2B0400S E1 5706654401334 EAN/GTIN DE 33954389 WEEE

25,647.09₹ excl. VAT

16-17 days* (IND)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Chain drive Synchro 1A/400mm/black WMX 814-2B0400S E1 thrust force 2000N, max. opening width... more
Chain drive Synchro 1A/400mm/Black - Window opener 2000N max. opening 400mm WMX 814-2B0400S E1 – WindowMaster – 5706654401334: Chain drive Synchro 1A/400mm/black WMX 814-2B0400S E1 thrust force 2000N, max. opening width 400mm, protection class (IP) IP20, housing aluminum, current consumption 1A, connection voltage 24V, length of connection cable 5m, width 37mm, height 25mm, programmable 24V DC chain drive for surface mounting for RWA and comfort ventilation. Area of application: Control via ±24V control units or bus-capable MotorController with MotorLink® technology, can be coupled with a WMB locking drive, synchronization of up to 4 window drives, no external synchronization module necessary, exact digital position feedback and possible programming of 3 different speeds in conjunction with MotorLink® controls, soft close function, reprogramming of pressure force, speed and reversal can be carried out at any time with the WindowMaster programming device WAT 100, built-in electronic load switch-off/limit switch, motor electronics with microcontroller, the drive reverses to the ideal position of the window to increase the service life of the window seal, easy installation, there are four variants of the drive: single drive (-1), synchro drive (-2), trial drive (-3) and quattro drive (-4), the synchro drives (-2, -3 and -4) have a built-in patented synchronization function, which ensures that the drives can communicate directly with each other without additional modules and even coordinate speed and position. On larger windows, up to 4 drives can be installed without an additional synchronization module, the drive is programmed this way that it stops and reverses in case of resistance during closing, drives connected to ±24 VDC control units (e.g. WUC), drives connected to control units with MotorLink® (e.g. WSC xxM) have three different speeds: automatic controlled speed – the drives move slowly and almost silently, manual controlled speed - the drives move faster and audibly, RWA and safety controlled speed - the drives move the fastest, RWA speed always has priority. Scope of delivery: WMX 814 E1: Drive with 5m cable (5-wire 0.34 mm²) with terminal protection strip connection and fast-in/fast-on connection cable for WLL supply line.
... more
Impact force 2000 N
Max. Opening width 400 mm
IP protection) IP20
Casing Aluminum
Current consumption 1 A
Supply voltage 24V
Length of connecting cable 5 m
Width 37 mm
Height 25 mm

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Chain drive Synchro 1A/400mm/Black - Window opener 2000N max. opening 400mm WMX 814-2B0400S E1"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.