Actuator, stroml.sch. electrothermal 230V - Electric servomotor ZBOOA-010.100

Actuator, stroml.sch. electrothermal 230V - Electric servomotor ZBOOA-010.100 – Alre-it – H9100010 – 4050528046604: Actuator, current-protected Electrothermal 230V ZBOOA-010.100 Suitable for valves, mains voltage 230 V AC, two-point control signal, linear design, control type on/off, length of connection cable 0.8m, connection to valve M30 x 1.5, with zero voltage return, voltage-free when closed, status message without, With mechanical level indicator, running time 240s, adjustment force 90N, stroke length 3mm, protection class (IP) IP42, max. electrical power consumption 3VA, ambient temperature 0 ... 50°C, height 39mm, width 39mm, depth 57mm, housing material plastic, electrothermal valve actuators for heating, ventilation and air conditioning. The drive is very space-saving thanks to its compact design. Due to the tapered design, especially in the fastening area of the nut, assembly is easy to handle. The fastening cable is not in the area of the fastening nut. This reduces the likelihood of contact with hot water-carrying devices. Since the fastening nut allows continuous screwing onto the thread, it is possible, in contrast to bayonet and snap-on couplings, to open the valve in a de-energized state by turning back the nut by two to three turns. Escaped water is drained off via a drainage system. Thanks to a special design, there is no need for seals. The actuators are suitable for the following valve and distributor makes, thanks to their M 30 x 1.5 attachment and their characteristic (normally closed): Beulco, Empur, Heimeier, Kamo, Oventrop , Purmo, SBK, SKV, Strawa, Taconova, Watts.