Supply module - Fieldbus power supply/segment module XN-PF-24VDC-D

Eaton - XN-PF-24VDC-D - Supply module - Fieldbus power supply/segment module XN-PF-24VDC-D
Photo source: fig. possibly similar
Photo source: fig. possibly similar
XN-PF-24VDC-D 140070 7640130121027 EAN/GTIN DE 92318050 WEEE

4,565.64₹ excl. VAT

16-17 days* (IND)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Supply voltage AC 50 Hz=0 V, Supply voltage AC 60 Hz=0 V, Supply voltage DC=18..30 V, Voltage... more
Supply module - Fieldbus power supply/segment module XN-PF-24VDC-D – Eaton – 140070 – 7640130121027: Supply voltage AC 50 Hz=0 V, Supply voltage AC 60 Hz=0 V, Supply voltage DC=18..30 V, Voltage type of supply voltage=DC, Number of HW-interfaces other=1, With optical interface=no, Supporting protocol for TCP/IP=no, Supporting protocol for PROFIBUS=no, Supporting protocol for CAN=no, Supporting protocol for INTERBUS=no, Supporting protocol for ASI=no, Supporting protocol for KNX=no, Supporting protocol for MODBUS=no, Supporting protocol for Data-Highway=no, Supporting protocol for DeviceNet=no, Supporting protocol for SUCONET=no, Supporting protocol for LON=no, Supporting protocol for PROFINET IO=no, Supporting protocol for PROFINET CBA=no, Supporting protocol for SERCOS=no, Supporting protocol for Foundation Fieldbus=no, Supporting protocol for EtherNet/IP=no, Supporting protocol for AS-Interface Safety at Work=no, Supporting protocol for DeviceNet Safety=no, Supporting protocol for INTERBUS-Safety=no, Supporting protocol for PROFIsafe=no, Supporting protocol for SafetyBUS p=no, Supporting protocol for other bus systems=yes, Radio standard Bluetooth=no, Radio standard Wi-Fi 802.11=no, Radio standard GPRS=no, Radio standard GSM=no, Radio standard UMTS=no, System accessory=yes, Degree of protection (IP)=IP20, Type of electric connection=Screw-/spring clamp connection, With potential separation=yes, With power supply module=no, Suitable as segment module=yes, Remote module=no, Fieldbus connection over separate bus coupler possible=yes, Bus diagnosis possible=yes, Rail mounting possible=yes, Wall mounting/direct mounting=no, Front built-in possible=no, Rack-assembly possible=no, Suitable for safety functions=no, SIL according to IEC 61508=None, Performance level according to EN ISO 13849-1=None, Appendant operation agent (Ex ia)=no, Appendant operation agent (Ex ib)=no, Explosion safety category for gas=None, Explosion safety category for dust=None, Width=12,6 mm, Height=74,1 mm, Depth=55,4 mm
... more
Supply voltage at AC 50 Hz 0 V
Supply voltage at AC 60 Hz 0 V
Supply voltage at DC 18..30 V
Voltage type of the supply voltage DC
Number of HW interfaces other 1
With optical interface no
Supports protocol for TCP / IP no
Supports protocol for PROFIBUS no
Supports protocol for CAN no
Supports protocol for INTERBUS no
Supports protocol for ASI no
Supports protocol for KNX no
Supports protocol for MODBUS no
Supports data highway protocol no
Supports protocol for DeviceNet no
Supports protocol for SUCONET no
Supports protocol for LON no
Supports protocol for PROFINET IO no
Supports protocol for PROFINET CBA no
Supports protocol for SERCOS no
Supports protocol for EtherNet / IP no
Supports protocol for DeviceNet Safety no
Supports protocol for INTERBUS safety no
Supports protocol for PROFIsafe no
Supports protocol for SafetyBUS p no
Supports protocol for other bus systems yes
Wireless standard Bluetooth no
Wireless standard WLAN 802.11 no
Radio standard GPRS no
Radio standard GSM no
Radio standard UMTS no
System component yes
IP protection) IP20
With electrical isolation yes
With feed module no
Suitable as a segment module yes
Distance module no
Bus diagnostics possible yes
Rail mounting possible yes
Wall / direct mounting possible no
Front installation possible no
Rack mounting possible no
Suitable for safety functions no
SIL according to IEC 61508 without
Performance level according to EN ISO 13849-1 without
Associated equipment (Ex ia) no
Associated equipment (Ex ib) no
Explosion protection category for gas without
Explosion protection category for dust without
Width 12.6 mm
Height 74.1 mm
Depth 55.4 mm

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Supply module - Fieldbus power supply/segment module XN-PF-24VDC-D"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.