Small distributor - accessories

According to the current standards, the structure of electrical distribution boxes consists of certain basic elements. However, as in most cases, there is no limited number of standard solutions. Here, too, individual implementations that are geared to the field of application, the building and other technical requirements must be found again and again. In our eibabo product range for accessories for small distributors, you have a very large selection of high-quality accessories at your disposal. You will find a variety of different modules for data transmission. We also carry sockets for the cable connection. These can be rotated three times and have increased protection against accidental contact. You can get high-quality assembly sets, patch panels and a wide variety of clamps at good prices.

Catalogue content:


In this eibabo® catalogue Distribution boards > Accessories for small distribution board you will find items from the following product groups:

Item overview:

  • Accessories for small distribution board
  • Accessories for small distributors
  • Accessories/spare parts for small distribution board
  • Bell transformer connection block
  • Clamp
  • Clip
  • Connecting comb
  • Connector fuse switch disconnector housing
  • Coupling piece for protection switch disconnector
  • Door
  • Fuse cartridge
  • Guide slide
  • High-voltage group kit
  • Installation kit
  • Insulating support
  • Insulation hood phase rail
  • Isolation cap phase busbar
  • Mounting frame
  • Mounting kit
  • Mounting set
  • Mounting set cooker group
  • Mounting set power current group
  • Page module
  • Separator slide
  • Spare parts for small distribution board
  • Stove group kit
  • Supplementary component for small distributors
  • Switching bridge


from the following manufacturers:

Manufacturer overview catalogue Small distributor - accessories:

  • ABB
  • ABN
  • Eaton
  • Hager
  • Mersen
  • OBO
  • Phoenix
  • Rittal
  • Schneider Electric
  • Siemens
  • Spelsberg
  • Striebel & John
  • Walther


 
According to the current standards, the structure of electrical distribution boxes consists of certain basic elements. However, as in most cases, there is no limited number of standard solutions.... read more »
Close window
Small distributor - accessories
According to the current standards, the structure of electrical distribution boxes consists of certain basic elements. However, as in most cases, there is no limited number of standard solutions. Here, too, individual implementations that are geared to the field of application, the building and other technical requirements must be found again and again. In our eibabo product range for accessories for small distributors, you have a very large selection of high-quality accessories at your disposal. You will find a variety of different modules for data transmission. We also carry sockets for the cable connection. These can be rotated three times and have increased protection against accidental contact. You can get high-quality assembly sets, patch panels and a wide variety of clamps at good prices.

Catalogue content:


In this eibabo® catalogue Distribution boards > Accessories for small distribution board you will find items from the following product groups:

Item overview:

  • Accessories for small distribution board
  • Accessories for small distributors
  • Accessories/spare parts for small distribution board
  • Bell transformer connection block
  • Clamp
  • Clip
  • Connecting comb
  • Connector fuse switch disconnector housing
  • Coupling piece for protection switch disconnector
  • Door
  • Fuse cartridge
  • Guide slide
  • High-voltage group kit
  • Installation kit
  • Insulating support
  • Insulation hood phase rail
  • Isolation cap phase busbar
  • Mounting frame
  • Mounting kit
  • Mounting set
  • Mounting set cooker group
  • Mounting set power current group
  • Page module
  • Separator slide
  • Spare parts for small distribution board
  • Stove group kit
  • Supplementary component for small distributors
  • Switching bridge


from the following manufacturers:

Manufacturer overview catalogue Small distributor - accessories:

  • ABB
  • ABN
  • Eaton
  • Hager
  • Mersen
  • OBO
  • Phoenix
  • Rittal
  • Schneider Electric
  • Siemens
  • Spelsberg
  • Striebel & John
  • Walther
Close filters
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
from to

2 From 35
No results were found for the filter!
RECOMMENDED
3D
Siemens - 8GB4683 - Blind cover strip 14TE, pure white RAL9010 - Accessory for distriburion board 8GB4683
2,184.82₹ excl. VAT

*

(For 10 Piece) plus shipping
(4,180.13₹ RRP***)
Blind cover strip 14TE, pure white RAL9010 - Accessory for distriburion board
Siemens
| 8GB4683
x 10 Piece
Add to wishlist
RECOMMENDED
3D
Spelsberg - AK3 FL02 - Flange - Accessory for distriburion board AK3 FL02
802.59₹ excl. VAT

*

plus shipping
(1,365.51₹ RRP***)
Flange - Accessory for distriburion board
Spelsberg
| AK3 FL02
RECOMMENDED
3D
Hager - VZ530N - Cable entry Volta - Accessory for distriburion board VZ530N
397.58₹ excl. VAT

*

plus shipping
(650.24₹ RRP***)
Cable entry Volta - Accessory for distriburion board
Hager
| VZ530N
RECOMMENDED
3D
Hager - VZ315FF - COAX module F/ F socket - Accessory for distriburion board VZ315FF
1,342.29₹ excl. VAT

*

plus shipping
(2,192.25₹ RRP***)
COAX module F/ F socket - Accessory for distriburion board
Hager
| VZ315FF
RECOMMENDED
3D
Hager - L061 - Raising profile 15mm 1m - Accessory for distriburion board L061
93.82₹ excl. VAT

*

plus shipping
(185.78₹ RRP***)
Raising profile 15mm 1m - Accessory for distriburion board
Hager
| L061
RECOMMENDED
3D
Spelsberg - AK3 KFL - Flange for AK-F - Accessory for distriburion board AK3 KFL
1,261.47₹ excl. VAT

*

plus shipping
(2,145.80₹ RRP***)
Flange for AK-F - Accessory for distriburion board
Spelsberg
| AK3 KFL
RECOMMENDED
3D
Eaton - HP-KLV - Replacement hinges - Accessory for distriburion board HP-KLV
204.36₹ excl. VAT

*

plus shipping
(333.48₹ RRP***)
Replacement hinges - Accessory for distriburion board
Eaton
| HP-KLV
RECOMMENDED
Returns
3D
Spelsberg - TR NS35-20 (VE10) - Träger Normschiene TR NS35-20 (VE10)
666.03₹ excl. VAT

*

plus shipping
(1,133.28₹ RRP***)
Standard rail carrier - Accessory for distriburion board
Spelsberg
| TR NS35-20 (VE10)
RECOMMENDED
3D
Spelsberg - AK AS - Masking strips - Cover for distribution board AK AS
116.11₹ excl. VAT

*

plus shipping
(195.07₹ RRP***)
Masking strips - Cover for distribution board
Spelsberg
| AK AS
RECOMMENDED
Hager - UM00M1 - Multimedia Kit 12xPatch Panel - Accessory for distriburion board UM00M1
15,962.54₹ excl. VAT

*

plus shipping
(28,907.95₹ RRP***)
Multimedia Kit 12xPatch Panel - Accessory for distriburion board
Hager
| UM00M1
RECOMMENDED
3D
Spelsberg - AK3 FL01 - Flange for AK-F - Accessory for distriburion board AK3 FL01
802.59₹ excl. VAT

*

plus shipping
(1,365.51₹ RRP***)
Flange for AK-F - Accessory for distriburion board
Spelsberg
| AK3 FL01
RECOMMENDED
3D
Eaton - SK-13N/16PE-KLV - N/PE screw terminal complete - Accessory for distriburion board SK-13N/16PE-KLV
952.14₹ excl. VAT

*

plus shipping
(1,653.48₹ RRP***)
N/PE screw terminal complete - Accessory for distriburion board
Eaton
| SK-13N/16PE-KLV
2 From 35
Viewed from you