Slotted screwdriver

Once they were very innovative products - the slotted screws. But over the years, they have been replaced by models with a Phillips or six-round slot, also known as Trox, especially in the classic handicraft sector. But even if the good old slotted screws are disappearing more and more from our everyday life, they are still used very frequently in the electrical sector. Why is that? The advantage of Phillips and Torx screws is that they center their rotation when using an electric screwdriver. This is particularly advantageous when fast turning movements are performed and high forces are at work. A slotted screw then quickly begins to wobble and the screwdriver slips out of the groove. In the electronics sector, however, this is a little bit different. Here is usually screwed by hand, the screws themselves are quite small and therefore the space on the screw head is very limited. Often only one slot can be accommodated on it. The action of large forces should also be avoided here. If you tighten the screw too much, you are more likely to slip out of the guide with the slotted screwdriver and thus prevent damage to the electrical components. You can find slotted screwdrivers with and without a magnetic tip for precise work on electrical and electronic components in your well-stocked eibabo online shop.

Catalogue content:


In this eibabo® catalogue Hand tools > Screwdriver for slot head screws you will find items from the following product groups:

Item overview:

  • Angled screwdriver
  • Carburetor Screwdriver
  • Double right-angled screwdriver
  • Electrician screwdriver
  • Electrician's Screwdriver
  • Electronics screwdriver
  • Feed adapter
  • Fitting screwdriver
  • Flexible screwdriver
  • Hand screwdriver
  • Helicopter
  • Insulated screw tool
  • L-wrench
  • Mechanics screwdriver
  • Offset screwdriver
  • Precision screwdriver
  • Screw tool
  • Screwdriver
  • Screwdriver for slot head screws
  • Segmented screwdriver
  • Slotted angle screwdriver
  • Slotted screwdriver
  • Straight screwdriver
  • Stubby screwdriver
  • Test screwdriver
  • VDE screwdriver
  • Voltage tester
  • Workshop screwdriver


from the following manufacturers:

Manufacturer overview catalogue Slotted screwdriver:

  • Cimco
  • Fluke
  • Hager
  • Klauke
  • Knipex
  • Phoenix
  • Siemens
  • WAGO
  • Weidmüller
  • Weidm?ller
  • Wera
  • Wiha


 
Once they were very innovative products - the slotted screws. But over the years, they have been replaced by models with a Phillips or six-round slot, also known as Trox, especially in the classic... read more »
Close window
Slotted screwdriver
Once they were very innovative products - the slotted screws. But over the years, they have been replaced by models with a Phillips or six-round slot, also known as Trox, especially in the classic handicraft sector. But even if the good old slotted screws are disappearing more and more from our everyday life, they are still used very frequently in the electrical sector. Why is that? The advantage of Phillips and Torx screws is that they center their rotation when using an electric screwdriver. This is particularly advantageous when fast turning movements are performed and high forces are at work. A slotted screw then quickly begins to wobble and the screwdriver slips out of the groove. In the electronics sector, however, this is a little bit different. Here is usually screwed by hand, the screws themselves are quite small and therefore the space on the screw head is very limited. Often only one slot can be accommodated on it. The action of large forces should also be avoided here. If you tighten the screw too much, you are more likely to slip out of the guide with the slotted screwdriver and thus prevent damage to the electrical components. You can find slotted screwdrivers with and without a magnetic tip for precise work on electrical and electronic components in your well-stocked eibabo online shop.

Catalogue content:


In this eibabo® catalogue Hand tools > Screwdriver for slot head screws you will find items from the following product groups:

Item overview:

  • Angled screwdriver
  • Carburetor Screwdriver
  • Double right-angled screwdriver
  • Electrician screwdriver
  • Electrician's Screwdriver
  • Electronics screwdriver
  • Feed adapter
  • Fitting screwdriver
  • Flexible screwdriver
  • Hand screwdriver
  • Helicopter
  • Insulated screw tool
  • L-wrench
  • Mechanics screwdriver
  • Offset screwdriver
  • Precision screwdriver
  • Screw tool
  • Screwdriver
  • Screwdriver for slot head screws
  • Segmented screwdriver
  • Slotted angle screwdriver
  • Slotted screwdriver
  • Straight screwdriver
  • Stubby screwdriver
  • Test screwdriver
  • VDE screwdriver
  • Voltage tester
  • Workshop screwdriver


from the following manufacturers:

Manufacturer overview catalogue Slotted screwdriver:

  • Cimco
  • Fluke
  • Hager
  • Klauke
  • Knipex
  • Phoenix
  • Siemens
  • WAGO
  • Weidmüller
  • Weidm?ller
  • Wera
  • Wiha
Close filters
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
from to

17 From 17
No results were found for the filter!
Wera - 05008102001 - Operating tool 0.6 x 3.5 x 81 mm - Screwdriver for slot head screws 05008102001
665.11₹ excl. VAT

*

plus shipping
(1,208.52₹ RRP***)
Operating tool 0.6 x 3.5 x 81 mm - Screwdriver for slot head screws
Wera
| 05008102001
Weidmüller - SDIL 1,0X5,5X125 - screwdriver - Screwdriver for slot head screws 5,5mm SDIL 1,0X5,5X125
731.99₹ excl. VAT

*

plus shipping
(891.76₹ RRP***)
screwdriver - Screwdriver for slot head screws 5,5mm
Weidmüller
| SDIL 1,0X5,5X125
Weidmüller - SDIL 0,5X3,0X100 - Screwdriver 100 mm, slotted - Screwdriver for slot head screws 3mm SDIL 0,5X3,0X100
433.81₹ excl. VAT

*

plus shipping
(529.48₹ RRP***)
Screwdriver 100 mm, slotted - Screwdriver for slot head screws 3mm
Weidmüller
| SDIL 0,5X3,0X100
Weidmüller - SDIL 0,8X4,0X100 - Screwdriver 100 mm, slotted - Screwdriver for slot head screws 4mm SDIL 0,8X4,0X100
496.04₹ excl. VAT

*

plus shipping
(603.80₹ RRP***)
Screwdriver 100 mm, slotted - Screwdriver for slot head screws 4mm
Weidmüller
| SDIL 0,8X4,0X100
Weidmüller - SDIL 1,2X6,5X150K - Screwdriver 150 mm, slotted - Screwdriver for slot head screws 6,5mm SDIL 1,2X6,5X150K
808.16₹ excl. VAT

*

plus shipping
(984.65₹ RRP***)
Screwdriver 150 mm, slotted - Screwdriver for slot head screws 6,5mm
Weidmüller
| SDIL 1,2X6,5X150K
Weidmüller - SDIL S 3-6,5/PH1/2 - Screwdriver set 6 pieces - Screwdriver for slot head screws SDIL S 3-6,5/PH1/2
3,102.59₹ excl. VAT

*

plus shipping
(3,780.70₹ RRP***)
Screwdriver set 6 pieces - Screwdriver for slot head screws
Weidmüller
| SDIL S 3-6,5/PH1/2
WAGO - 210-636 - Operating tool 210-636
817.45₹ excl. VAT

*

Operating tool
WAGO
| 210-636
Square slotted screwdriver - Screwdriver for slot head screws SDIR 2 X 100
1,174.15₹ excl. VAT

*

plus shipping
(1,430.53₹ RRP***)
Square slotted screwdriver - Screwdriver for slot head screws
Weidmüller
| SDIR 2 X 100
17 From 17
Viewed from you