Slotted screwdriver

Once they were very innovative products - the slotted screws. But over the years, they have been replaced by models with a Phillips or six-round slot, also known as Trox, especially in the classic handicraft sector. But even if the good old slotted screws are disappearing more and more from our everyday life, they are still used very frequently in the electrical sector. Why is that? The advantage of Phillips and Torx screws is that they center their rotation when using an electric screwdriver. This is particularly advantageous when fast turning movements are performed and high forces are at work. A slotted screw then quickly begins to wobble and the screwdriver slips out of the groove. In the electronics sector, however, this is a little bit different. Here is usually screwed by hand, the screws themselves are quite small and therefore the space on the screw head is very limited. Often only one slot can be accommodated on it. The action of large forces should also be avoided here. If you tighten the screw too much, you are more likely to slip out of the guide with the slotted screwdriver and thus prevent damage to the electrical components. You can find slotted screwdrivers with and without a magnetic tip for precise work on electrical and electronic components in your well-stocked eibabo online shop.

Catalogue content:


In this eibabo® catalogue Hand tools > Screwdriver for slot head screws you will find items from the following product groups:

Item overview:

  • Angled screwdriver
  • Carburetor Screwdriver
  • Double right-angled screwdriver
  • Electrician screwdriver
  • Electrician's Screwdriver
  • Electronics screwdriver
  • Feed adapter
  • Fitting screwdriver
  • Flexible screwdriver
  • Hand screwdriver
  • Helicopter
  • Insulated screw tool
  • L-wrench
  • Mechanics screwdriver
  • Offset screwdriver
  • Precision screwdriver
  • Screw tool
  • Screwdriver
  • Screwdriver for slot head screws
  • Segmented screwdriver
  • Slotted angle screwdriver
  • Slotted screwdriver
  • Straight screwdriver
  • Stubby screwdriver
  • Test screwdriver
  • VDE screwdriver
  • Voltage tester
  • Workshop screwdriver


from the following manufacturers:

Manufacturer overview catalogue Slotted screwdriver:

  • Cimco
  • Fluke
  • Hager
  • Klauke
  • Knipex
  • Phoenix
  • Siemens
  • WAGO
  • Weidmüller
  • Weidm?ller
  • Wera
  • Wiha


 
Once they were very innovative products - the slotted screws. But over the years, they have been replaced by models with a Phillips or six-round slot, also known as Trox, especially in the classic... read more »
Close window
Slotted screwdriver
Once they were very innovative products - the slotted screws. But over the years, they have been replaced by models with a Phillips or six-round slot, also known as Trox, especially in the classic handicraft sector. But even if the good old slotted screws are disappearing more and more from our everyday life, they are still used very frequently in the electrical sector. Why is that? The advantage of Phillips and Torx screws is that they center their rotation when using an electric screwdriver. This is particularly advantageous when fast turning movements are performed and high forces are at work. A slotted screw then quickly begins to wobble and the screwdriver slips out of the groove. In the electronics sector, however, this is a little bit different. Here is usually screwed by hand, the screws themselves are quite small and therefore the space on the screw head is very limited. Often only one slot can be accommodated on it. The action of large forces should also be avoided here. If you tighten the screw too much, you are more likely to slip out of the guide with the slotted screwdriver and thus prevent damage to the electrical components. You can find slotted screwdrivers with and without a magnetic tip for precise work on electrical and electronic components in your well-stocked eibabo online shop.

Catalogue content:


In this eibabo® catalogue Hand tools > Screwdriver for slot head screws you will find items from the following product groups:

Item overview:

  • Angled screwdriver
  • Carburetor Screwdriver
  • Double right-angled screwdriver
  • Electrician screwdriver
  • Electrician's Screwdriver
  • Electronics screwdriver
  • Feed adapter
  • Fitting screwdriver
  • Flexible screwdriver
  • Hand screwdriver
  • Helicopter
  • Insulated screw tool
  • L-wrench
  • Mechanics screwdriver
  • Offset screwdriver
  • Precision screwdriver
  • Screw tool
  • Screwdriver
  • Screwdriver for slot head screws
  • Segmented screwdriver
  • Slotted angle screwdriver
  • Slotted screwdriver
  • Straight screwdriver
  • Stubby screwdriver
  • Test screwdriver
  • VDE screwdriver
  • Voltage tester
  • Workshop screwdriver


from the following manufacturers:

Manufacturer overview catalogue Slotted screwdriver:

  • Cimco
  • Fluke
  • Hager
  • Klauke
  • Knipex
  • Phoenix
  • Siemens
  • WAGO
  • Weidmüller
  • Weidm?ller
  • Wera
  • Wiha
Close filters
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
from to

2 From 17
No results were found for the filter!
RECOMMENDED
3D
WAGO - 210-658 - Screwdriver - Screwdriver for slot head screws 3,5mm 210-658
433.81₹ excl. VAT

*

plus shipping
(663.25₹ RRP***)
Screwdriver - Screwdriver for slot head screws 3,5mm
WAGO
| 210-658
RECOMMENDED
Returns
3D
Legrand Bticino - 91945 - Demontagewerkzeug 91945
800.73₹ excl. VAT

*

plus shipping
(1,453.76₹ RRP***)
Dismantling tool - Screwdriver for slot head screws
Legrand Bticino
| 91945
RECOMMENDED
3D
RECOMMENDED
3D
Cimco - 11 7701 - 2K VDE screwdriver 2.5x75 - Screwdriver for slot head screws 2,5mm 11 7701
508.12₹ excl. VAT

*

plus shipping
(631.66₹ RRP***)
2K VDE screwdriver 2.5x75 - Screwdriver for slot head screws 2,5mm
Cimco
| 11 7701
RECOMMENDED
3D
RECOMMENDED
3D
Phoenix - SZF 0-0,4x2,5 - Screwdriver - Screwdriver for slot head screws 2,5mm SZF 0-0,4x2,5
398.51₹ excl. VAT

*

Screwdriver - Screwdriver for slot head screws 2,5mm
Phoenix
| SZF 0-0,4x2,5
RECOMMENDED
3D
WAGO - 210-647 - Operating tool blade 2.5x0.4mm - Screwdriver for slot head screws 2,5mm 210-647
376.21₹ excl. VAT

*

plus shipping
(571.28₹ RRP***)
Operating tool blade 2.5x0.4mm - Screwdriver for slot head screws 2,5mm
WAGO
| 210-647
RECOMMENDED
3D
Wiha - SB320104010001 - Slotted screwdriver SoftFinish electric - Screwdriver for slot head screws 4mm SB320104010001
1,097.05₹ excl. VAT

*

plus shipping
(1,575.45₹ RRP***)
Slotted screwdriver SoftFinish electric - Screwdriver for slot head screws 4mm
Wiha
| SB320104010001
RECOMMENDED
3D
RECOMMENDED
3D
Cimco - 11 7706 - 2K VDE screwdriver 6.5x150 - Screwdriver for slot head screws 6,5mm 11 7706
915.91₹ excl. VAT

*

plus shipping
(1,139.78₹ RRP***)
2K VDE screwdriver 6.5x150 - Screwdriver for slot head screws 6,5mm
Cimco
| 11 7706
RECOMMENDED
3D
Cimco - 11 7708 - 2K VDE screwdriver 8.0x175 - Screwdriver for slot head screws 8mm 11 7708
823.02₹ excl. VAT

*

plus shipping
(1,139.78₹ RRP***)
2K VDE screwdriver 8.0x175 - Screwdriver for slot head screws 8mm
Cimco
| 11 7708
RECOMMENDED
3D
Wiha - 500 2 3,0x60 - Slotted small screwdriver 3.0mm, 60mm - Screwdriver for slot head screws 3mm 500 2 3,0x60
179.28₹ excl. VAT

*

plus shipping
(247.09₹ RRP***)
Slotted small screwdriver 3.0mm, 60mm - Screwdriver for slot head screws 3mm
Wiha
| 500 2 3,0x60
2 From 17
Viewed from you