Dual radio module for smoke alarm devices 234700

Dual radio module for smoke alarm devices 234700 – Gira – 4010337016632: Dual radio module for smoke detectors 234700 Type of accessories Radio module, radio module for Dual Q smoke detectors Features: Radio module for the wireless connection of Dual Q smoke detectors. Downwards compatible, therefore can also be used for Dual VdS smoke detectors. Notes: If a smoke detector detects a fire, all assigned smoke detectors sound an alarm. The radio module is plugged into the interface of the dual smoke detector. The networking terminals of the smoke alarm can still be used when the module is plugged in. This allows combined lines (wired and wireless) to be set up. Due to their compatibility with the radio bus system, radio actuators can be controlled via an alarm message. This can e.g. B. can be used to switch on lights or raise blinds in the event of an alarm. With a radio handheld or wall transmitter, the smoke alarm can be muted for approx. 10 minutes after an alarm. If another networked smoke alarm goes off during this time, e.g. If, for example, an alarm is triggered via the 2-wire line or radio, the smoke detector will sound the alarm despite being muted. The control of eNet components is only implemented in conjunction with the radio converter on eNet. From index I02 onwards, the radio module for dual smoke detectors is compatible with the radio diagnostic tool (2333 00). Please note the planning information in the “Technical Information” brochure download.gira.de. The battery cannot be purchased as a spare part from Gira. Features: Radio module for the wireless connection of Dual Q smoke detectors. Downwards compatible, therefore can also be used for Dual VdS smoke detectors. Notes: If a smoke detector detects a fire, all assigned smoke detectors sound an alarm. The radio module is plugged into the interface of the dual smoke detector. The networking terminals of the smoke alarm can still be used when the module is plugged in. This allows combined lines (wired and wireless) to be set up. Due to their compatibility with the radio bus system, radio actuators can be controlled via an alarm message. This can e.g. B. can be used to switch on lights or raise blinds in the event of an alarm. With a radio handheld or wall transmitter, the smoke alarm can be muted for approx. 10 minutes after an alarm. If another networked smoke alarm goes off during this time, e.g. If, for example, an alarm is triggered via the 2-wire line or radio, the smoke detector will sound the alarm despite being muted. The control of eNet components is only implemented in conjunction with the radio converter on eNet. From index I02 onwards, the radio module for dual smoke detectors is compatible with the radio diagnostic tool (2333 00). Please note the planning information in the “Technical Information” brochure download.gira.de. The battery cannot be purchased as a spare part from Gira.