Function tester for AC charging points - Measuring/testing instrument E-Mobility M525F

Function tester for AC charging points - Measuring/testing instrument E-Mobility M525F – Gossen Metrawatt – 4012932134469: Function tester for AC charging points M525F simulation vehicle status, status display charging process, test PE connection, connection type 2, handheld version, width 110mm, height 210mm, depth 70mm, weight 998g, function tester for AC charging points according to IEC 61851-1, VDE 0122- 1. The PROFITEST H+E EASY CHECK is used to test AC charging points in charging mode 3 on a type 2 socket or with a permanently installed type 2 cable. To do this, the automatic function tester is simply connected to the charging point and the communication between the charging point and EV is checked at the touch of a button. With the PROFITEST H+E EASY CHECK you can test AC charging points in charging mode 3 on a Type 2 socket or with a permanently installed Type 2 cable. To do this, the automatic function tester is simply connected to the charging point and the communication between the charging point and EV is checked at the touch of a button. If the charging process cannot be started at an AC charging point, a malfunction of the AC charging point is usually suspected. The result: the operator immediately calls in a qualified electrician, even if the AC charging point is not the cause of the malfunction. With the PROFITEST H+E EASY CHECK function tester for AC charging points, even laypeople in electrical engineering such as system operators, service providers or caretakers can now safely check the functionality of the AC charging point. Specialist personnel are only called in if a malfunction is diagnosed. This way you save costs and time. For electricians, the tester offers, in addition to standard electrical testing, the complete scope of functional testing without additional devices such as a multimeter or an oscillograph. Complete diagnosis of an e-charging station with just one push of a button Vehicle status evaluation PWM signal short circuit between CP and PE phases and rotating field, battery status. Simple operation and diagnosis. Battery-operated compact device, therefore also suitable for outdoor use. With the PROFITEST H+E EASY CHECK function tester for AC charging points, even electrical laypeople such as system operators, service providers or caretakers can safely check the functionality of the AC charging point. Specialist personnel are only called in if a malfunction is diagnosed. This saves costs and time. With the PROFITEST H+E EASY CHECK, laypeople in electrical engineering such as system operators, service providers or caretakers can safely test the functionality of AC charging points in charging mode 3 on a type 2 socket or with a permanently installed type 2 cable. Automatic function tester for AC charging points. Also for AC charging points with a firmly attached cable. Easy to use – even for electrical laypeople. Automatic test process saves time and money. Results in plain text on the display. Error display with results to be passed on to service. USB interface for charging the battery. Automatic function tester for AC charging points in charging mode 3 Simulation of an EV at the charging point with type 2 plug. Inlet and charging points with tightly attached cable. Checking the values for 20 A cables and for 32 A cables. Checking the vehicle states status A, status B, status C, phases, tOFF (status E), rotating field, duty cycle. Result in plain text on the display. Error display with results for forwarding to the service (internal memory for the current measured value) USB interface for charging the battery. 1x PROFiTEST H+E EASY CHECK (M525F) 1x charging cable (micro USB plug) 1x operating instructions