Measuring and testing device - Multifunction installation tester PROFiTEST MF TECH

Measuring and testing device - Multifunction installation tester PROFiTEST MF TECH – Gossen Metrawatt – M535K – 4012932133738: Measuring and testing device PROFiTEST MF TECH digital display, limit value display, insulation resistance measurement, insulation resistance measurement with ramp function, resistance of insulating floors and walls, surge arrester testing, low-resistance measurement, low-resistance measurement with ramp function, grounding measurement, loop resistance/impedance measurement, loop measurement without RCD/FI triggering, internal network resistance measurement, Determination of short-circuit current/overcurrent protective devices, RCD/FI test, curve shape for RCD/FI test for residual current circuit breakers type A, F and type B, B+, RCD/FI test with increasing residual current, RCD/FI analysis function, PRCD test type S, Type K, testing of e-charging stations, simulation of vehicle status, rotating field test, structured measured value memory, measured value memory, interface, remote control of the test device, PROFITEST MF TECH / MF XTRA installation tester for testing the effectiveness of protective measures in electrical systems in accordance with E-CHECK / DIN VDE 0100-600 / VDE 0413 / VDE 0105-100 PROFITEST MF TECH / MF Protocol - create system structure / measure & save / generate protocol Preconfigured and self-programmable test sequences (IZYTRONIQ) for quick testing Storage concept for up to 50,000 data sets Context-sensitive color graphic display with high response speed and brilliant readability Innovative operating concept - All crucial measuring functions - quickly selectable via rotary switch Data interfaces (USB Type B for PC connection / USB Type A for USB keyboard, barcode reader or RFID scanner) Future-proof platform concept and connectivity (WIFI, Bluetooth, connection of mobile data acquisition devices) Intuitive operator guidance with help function to support upcoming measurement tasks Operator protection through PE -Detection when used by finger contact Wide range measurement for all AC and three-phase networks with voltages from 65 to 500 V and frequencies from 15.4 to 420 Hz RLO low ohm measurement (200 mA direct current & automatic polarity reversal) ideal for detecting corrosion on PE terminal points in RISO systems - measurement of insulation resistance with variable nominal voltage of 50V - 1000V or increasing test voltage (to protect overvoltage devices). Measuring point information in the test report (N-PE, L1-PE, L2-PE, L3-PE…) ZL-PE Standard-compliant loop resistance measurement for RCD TYPE A to determine the short-circuit current in the event of a ground fault (L-PE) and ZL-N network impedance measurement to determine the short-circuit current (LN) Voltage drop measurement of the difference between the feed and sockets using the OFF-SET function. Testing special RCD circuit breakers: selective S, SRCDs, PRCDs (Schukomat, Sidos etc.), type G/R, type AC, type A, F , Type B, B+ and Type EV and the current protective contacts RDC and RCMB in charging devices (wall boxes and charging stations) U One-time measurement of all voltages (LN, L-PE, N-PE) at protective contact sockets using a test adapter. Measuring protective conductor and differential currents using clamps (optional accessories) Mains-related earth resistance measurement (so-called city earthing measurement) Battery-operated earth resistance measurements: 3-pole/4-pole and earth loop resistance measurements (2 clamp method using optionally available current clamps and adapters), specific earth resistance Measuring the impedance of insulating Floors and walls (site insulation impedance) Incl. DAkkS calibration certificate worth €211 SCOPE OF DELIVERY: Test device, protective contact plug, 2-pole measuring adapter and cable for expansion to the 3-pole adapter (PRO-A3-II), 2 x crocodile clips , shoulder strap, set of batteries (Z502H), charger (Z502R), USB interface cable, IZYTRONIQ BUSINESS starter (database software) with cloud voucher (12 months), DAkkS calibration certificate measuring and testing device for testing the effectiveness of protective measures on stationary electrical installations Completion, repair, expansion and on the occasion of a repeat inspection