Measuring and testing device set - Digital Profipaket XTRA IQ
Profipaket XTRA IQ
M536M
4012932134728
EAN/GTIN
DE 72794336
WEEE
Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.
Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.
Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Measuring and testing equipment set professional package , earth measurement=yes, selective earth...
more
Measuring and testing device set - Digital Profipaket XTRA IQ – Gossen Metrawatt – M536M – 4012932134728: Measuring and testing equipment set professional package , earth measurement=yes, selective earth measurement=yes, earth loop measurement=yes, specific earth measurement=yes, loop resistance/impedance measurement=yes, loop measurement without RCD/FI tripping=yes, internal network resistance measurement=yes, determination of short-circuit current/overcurrent protective devices=yes, RCD /FI test=yes, RCD/FI test with increasing residual current=yes, RCD/FI analysis function=yes, PRCD test type S, type K=yes, testing of IMDs and RCMs=yes, measuring leakage currents with adapter= yes, testing of e-charging stations, simulation of vehicle status=yes, rotating field test=yes, structured measured value memory=yes, measured value memory=yes, interface=yes, printer connection=no, printer integrated=no, remote control of the test device=yes, test device set '' XTRA IQ professional package with PROFITEST MXTRA IQ and defined accessories for testing the effectiveness of protective measures on fixed electrical installations in accordance with the test standards according to IEC 60364-6 (DIN VDE 0100-600) and EN 50110-1 (DIN VDE 0105-100) . Measuring category 300 V CAT IV / 600 V CAT III. The testing equipment set “XTRA IQ professional package” makes your investment decision easy. With accessories that are perfectly tailored to your requirements, the set is particularly suitable for your testing tasks, including in the context of DGUV regulation 3 and in the area of earth resistance measurements. Professional recording of the test objects and documentation of the test. Measuring and testing process - easy creation of the system structure / measuring & saving / generating a protocolPre-configured and self-programmable test sequences for quick testing of electrical systemsStorage concept for up to 50,000 data setsTesting of all current AC-sensitive RCDs and many moreProtection of the operator through PE detection when used through finger contactSelected accessories for upcoming measuring tasks. Defined accessories for special measuring tasks to determine the earthing resistance Intuitive user guidance with help function to support upcoming measuring tasks All crucial measuring functions can be quickly selected using a rotary switch. Thanks to the compact, shock-proof housing with integrated rubber protection, it is particularly suitable for mobile use, even on construction sites and in industrial environments. Thanks to extensive setting options, among other things Language also suitable for international use Four-wire measurement technology - no compensation of the measuring lines required. Tests of the effectiveness of protective measures on stationary electrical systems in accordance with IEC 60364-6 (DIN VDE 0100-600), EN 50110-1 (DIN VDE 0105-100), EN 60204-1 (VDE 0113-1) and other country-specific standards. Testing of e-charging stations according to EN 61851-1 (DIN VDE 0122-1). e.g.: General electrical installations alternating/three-phase current, lightning protection systems, power generators, industrial companies, mechanical engineering, public institutions, authorities, universities, service providers for DGUV regulation 3, etc. Defined accessories for special measuring tasks Wide-range measuring device for all alternating current and three-phase networks with voltages from 65 to 500 V and frequencies from 15.4 to 420 Hz Loop and network impedance measurement with DC bias magnetization Measurement of insulation resistance with nominal voltage, with variable or increasing test voltage Low resistance measurement with automatic polarity reversal Testing of residual current protective devices and special RCD circuit breakers (selective S, SRCDs, PRCDs, Schukomat , Sidos, type G/R, AC, A, F, B, B+, EV, MI) Testing residual current (RCD) protection circuits in IT networks Testing insulation monitoring devices (IMDs) Testing residual current monitoring devices (RCMs) Measuring the Grounding resistance (mains operation / battery operation) Leakage current measurement with PRO-AB adapter Standard testing of e-charging stations according to IEC 61851 in conjunction with the PRO-TYP I/II test adapter Testing of PRCD types S and K using PROFITEST PRCD Residual voltage measurement according to EN 60204 Auto function test sequences USB / Bluetooth interface Push-Print function Sending the measured value after the measurement has been completed. Innovative and comprehensive operating concept Quick access to measuring and testing functions using rotary switches and softkeys User-friendly No complicated replugging of the measuring lines required Modern data management Extensive data management concept in conjunction with the user software, including customer and measured value management, test sequences, logging Unique storage concept Creation of system structures customer, system, machine , distributors, RCD, IMD, RCM, circuits, earth electrodes, equipotential bonding rails, equipment and individual measuring points PUSH-PRINT function Sending the measured value via Bluetooth / USB after the measurement has been completed Test sequences Creation of individual test sequences for quick and safe testing of electrical systems and machines Universal Interface bidirectional data exchange (USB), connection of barcode scanner and Bluetooth/USB: push-print function. 1 x PROFITEST MXTRA with IZYTRONIQ BUSINESS PROFESSIONAL 1 x protective contact plug insert (country-specific) 1 x 2-pin measuring adapter and 1 x cable for expansion to the 3-pin adapter (PRO-A3-II) 2 x crocodile clips 1 x shoulder strap 1 x Set of batteries (Z502H) 1 x charger (Z502R) 1 x short operating instructions 1 x safety information sheet 1 x DAkkS calibration certificate 1 x USB interface cable 1 x VARIO PLUG SET 1 x Set-Probes (test tip set) 1 x PRO-W 1 x E- Clip 2 generator clamp 1 x Z3512A measuring clamp 1 x PRO-RE-2 measuring adapter 1 x professional case with internal division
...
more
Display | digital |
Limit indicator | yes |
Insulation resistance measurement | yes |
Insulation resistance measurement with ramp function | yes |
Überspannungsableiterprüfung | yes |
Low- | yes |
Low resistance measurement with ramp function | yes |
Earth measurement | yes |
Selective grounding measurement | yes |
Earth Ground | yes |
Specific grounding measurement | yes |
Loop resistance / impedance measurement | yes |
Loop measurement without RCD / FI tripping | yes |
Mains internal resistance measurement | yes |
RCD / FI test | yes |
RCD / FI test with increasing fault current | yes |
RCD / FI analysis function | yes |
PRCD type S, type K test | yes |
Checking IMDs and RCMs | yes |
Measuring leakage currents with adapter | yes |
Phase sequence test | yes |
Structured measured value memory | yes |
Measurement memory | yes |
Interface | yes |
Printer port | no |
Integrated printer | no |
Remote control of the tester | yes |
Cookie settings
This website uses cookies that are required for the technical operation of the website and always stored. Other cookies that enhance convenience when using this website, or that are intended for direct marketing or to simplify interaction with other websites and social networks, are only stored with your consent.
Configuration
Technically required
These cookies are required for the basic functions of the shop.
Accept all cookies
Amazon Pay
CSRF token
Cookie settings
Currency change
Customer recognition
Customer-specific caching
FACT-Finder tracking
Individual prices
Reject all cookies
Selected shop
Session
Wish list
Device recognition
Saferpay payments
PayPal payments
IP2location
Listing settings
Trustami
Wishlist
TagManager
Statistics and tracking
Google analytics
Partner program
Custom tracking