Load management module 3ph - Accessory for regenerative energy XEV305

Load management module 3ph - Accessory for regenerative energy XEV305 – Hager – 4012740854290: Load management module 3ph XEV305 charging control witty house load limitation + PV CHP charging 3-phase. Charging control module for use with Hager charging station and for installation in the meter cabinet. The module enables the charging current of the charging station to be dynamically adjusted to the available free capacity of the house installation in order to avoid overloading. If the set limit value is exceeded, the charging current of the vehicle is reduced until charging is interrupted. Alternatively, the device can also be used for the targeted charging of regeneratively generated energy (PV, CHP). To do this, the current transformer is attached to the feed line. After connecting a vehicle, the charging station waits until the minimum current is exceeded and then starts charging and follows the current fed in dynamically. Charging control module consisting of DIN series installation devices with 3 converters. Possible adjustable limit values for the entire installation from 15 to 100 A. Note: A two-wire connection to the charging control module in the charging station is required.