Wall cabinet 500x550x205mm - Distribution cabinet (empty) 500x550mm FP32SW2

Wall cabinet 500x550x205mm - Distribution cabinet (empty) 500x550mm FP32SW2 – Hager – 3250612660759: Wall cabinet 500x550x205mm FP32SW2 Type of installation other, type of cover lid, design lid closed, type of door single, rated current (In) 250A, height 500mm, width 550mm, depth 205mm, installation depth 205mm, inner depth 143mm, material thickness housing 1mm, material thickness door/lid 1mm , color white, RAL number 9010, number of modules 72, number of rows 3, width in pitch units 24, number of openings for flange plates 4, mounting option, number of cable entries 4, housing material steel, surface powder-coated, degree of protection (IP) IP54, protection class II, impact resistance IK09, functional integrity without, cabinet, univers, IP54, insulation class II, 500 x 550 x 205 mm. Wall-mounted cabinet for indoor installation with VDE certificate (production monitoring) according to DIN EN 61439-1/-3 and dimensional standard DIN 43870, for surface-mounted, flush-mounted or partially recessed installation. For setting up a low-voltage distribution board up to 400 A, 3AC 230/400 V 50 Hz. Degree of protection IP54, protection class II, air and creepage distances according to DIN VDE 0110-1/-2. Consisting of cupboard with door made of powder-coated, burned-in, stable profiled 1 mm thick sheet steel, inner lining made of plastic. Push-through flanges installed at the top and bottom of each panel, rear knockout in the plastic part and busbar bushings as a knockout on both sides in the lower area. Door flush with the inside, adjustable hinges, optionally left or right hinged with 110 degree opening angle. Door with latch, from a width of 800 mm and for all cabinets from a height of 1250 mm with a bar lock with three-point locking. Note: Door lock can be replaced with other locks. Cabinet can be flanged next to and on top of each other.