Centrifugal duct fan 60W, 400cbm/h, IPX4 - Duct fan 350m³/h ERR 16/1

Centrifugal duct fan 60W, 400cbm/h, IPX4 - Duct fan 350m³/h ERR 16/1 – Maico – 0080.0273 – 4012799802730: Centrifugal tube fan 29W, 350m³/h, IPX4 ERR 16/1 Material of the housing Steel, treated, air volume unloaded 350m³/h, connection voltage 230V, protection class (IP) IPX4, length 210mm, diameter of the housing 250mm, radial impellers with backward curved blades. Connection pieces on the suction and pressure sides, for direct installation in ventilation pipes. Mounting foot available as an accessory. Conveying direction: The conveying and rotation directions are marked by arrows on the fan housing. Motor: external rotor capacitor motor. Operating capacitor ready for connection in the terminal box. Speed controllable. Thermal overload protection as standard. Robust motor with ball bearings, maintenance-free. Protection class IP X4 when installed in ventilation ducts with at least 1 m pipe on the suction and pressure sides. Installation instructions: Installation possible in any position. To avoid vibration transmission to the pipe system, use elastic sleeves ELR. Electrical connection: External terminal box with cable entry grommet. Safety instructions: Only operate the fan with free suction or exhaust if the impeller is protected against contact in accordance with DIN EN ISO 13857. To do this, attach the SGR protective grille. Article: ERR 16/1, delivery volume: 350 m3/h, speed: 2163 1/min, impeller type: radial, speed controllable: yes, SEC average: -11 kWh/(m2*a), voltage type: alternating current, rated voltage: 230 / 220 V, mains frequency: 50 Hz / 60 Hz, nominal power: 29 W, IMax: 0.14 A, protection class: IP X4, thermal class: F, installation position: vertical / horizontal, housing material: sheet steel, powder-coated, weight: 2.8 kg, nominal width: 160 mm, width: 250 mm, height: 237 mm, depth: 210 mm, conveyor temperature at nominal current: -20 °C to 60 °C, conveyor temperature at IMax: -20 °C to 60 °C, DC motor: false.false