Overvoltage protection - Surge protection for signal systems S-PT-EX(I)-24DC-3/4

Phoenix - S-PT-EX(I)-24DC-3/4 - Overvoltage protection - Surge protection for signal systems S-PT-EX(I)-24DC-3/4
Photo source: fig. possibly similar
Photo source: fig. possibly similar
S-PT-EX(I)-24DC-3/4 2882585 4046356098076 EAN/GTIN DE 50738265 WEEE

11,495.83₹ excl. VAT
21,921.60₹ (-47.56% RRP***)

16-17 days* (IND)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Overvoltage protection S-PT-EX(I)-24DC-3/4'' Rated voltage DC 24... 24V, maximum continuous... more
Overvoltage protection - Surge protection for signal systems S-PT-EX(I)-24DC-3/4 – Phoenix – 2882585 – 4046356098076: Overvoltage protection S-PT-EX(I)-24DC-3/4'' Rated voltage DC 24... 24V, maximum continuous voltage AC 21V, maximum continuous voltage DC 30V, rated discharge current (8/20) 10kA, rated load current 0.35A, protection level wire /wire 50V, protection level wire/earth 1400V, limit frequency 2.5MHz, type of installation other, connection 1 terminal, signaling on the device without, overvoltage protection in the screw-on module IP67 for measuring sensors in intrinsically safe circuits, direct installation via 3/4 NPT external thread, cable gland for signal line, two-stage protection circuit. HART capable.
... more
Rated voltage DC 24V
Highest continuous voltage AC 21V
Highest continuous voltage DC 30 V
Nominal discharge current (8/20) 10 kA
Nominal load current 0.35 A
Protection level wire / core 50V
Protection level core / earth 1400 V
Cut-off frequency 2.5 MHz
Mounting other
Connection 1 Clamp
SPD no
With telecommunication contact no
Signaling on the device without
Explosion-tested version yes

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Overvoltage protection - Surge protection for signal systems S-PT-EX(I)-24DC-3/4"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.